808546
48
Zoom out
Zoom in
Previous page
1/60
Next page
48
Start-up
Place the switch actuator onto the DIN rail (see
figure 3). Make sure that you can read the letters
on the device and display and that the connect-
ing terminals of channel 1 and 2 are at the top.
Make sure that the catch spring (G) engages
properly and that the device is securely seated on
the rail (see figure 4).
Wire the device according to the connecting dia-
grams in figure 6 or 7.
Connect the phase conductor as well as the
switched phase (to the consumer) to the corre-
sponding terminals (F) (see figure 6). You can con-
ne
ct any types of phase conductors (L1, L2, L3).
To enable power supply for the switch actuator,
connect the neutral conductor to terminal (I) and
the phase conductor to terminal (H) (see figure 7).
You can connect any types of phase conductors
(L1, L2, L3).
The phase conductor connection is marked with
an arrow pointing to the centre of the device, the
switched phase conductor with an arrow point-
ing towards outside. To connect or loosen the
conductor, the white actuation lever at the top of
the clamp has to be pressed (see figure 5).
The network terminals may be used only for con-
necting the power supply to the device or for
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HomeMatic HmIP-DRSI4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HomeMatic HmIP-DRSI4 in the language / languages: English, German as an attachment in your email.

The manual is 6.9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HomeMatic HmIP-DRSI4

HomeMatic HmIP-DRSI4 User Manual - English, German - 2 pages

HomeMatic HmIP-DRSI4 User Manual - Dutch - 2 pages

HomeMatic HmIP-DRSI4 User Manual - French - 2 pages

HomeMatic HmIP-DRSI4 User Manual - Italian, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info