808528
47
Zoom out
Zoom in
Previous page
1/61
Next page
47
Start-up
Disconnect the power distribution panel from the
mains (see figure 2) and, if necessary, cover any
live parts (see safety rules).
Remove the cover from the power distribution
panel.
Place the blind actuator onto the DIN rail (see
figure 3). Make sure that you can read the letters
on the device and display and that the connecting
terminals of channel 1 and 2 are at the top.
Make sure that the catch spring (I) engages
properly and that the device is securely seated on
the rail (see figure 4).
Wire the device according to the connecting
diagrams in figure 6 or 7.
To enable power supply for the blind actuator,
connect the neutral conductor to terminal K and
the phase conductor to terminal J (see figure 7).
You can connect any types of phase conductors
(L1, L2, L3).
Connect the phase conductor for the selected
channel to the corresponding terminal (G) (see
figure 6). Any types of phase conductors (L1,
L2, L3) can be connected to the power input
terminals.
Connect the switched phase conductor to move
the blinds up for the selected channel to the
corresponding terminal ( ) (F) (see figure 6+7).
Connect the switched phase conductor to move
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HomeMatic HmIP-DRBLI4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HomeMatic HmIP-DRBLI4 in the language / languages: English, German as an attachment in your email.

The manual is 7.79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HomeMatic HmIP-DRBLI4

HomeMatic HmIP-DRBLI4 User Manual - English, German - 2 pages

HomeMatic HmIP-DRBLI4 User Manual - Dutch - 2 pages

HomeMatic HmIP-DRBLI4 User Manual - French - 2 pages

HomeMatic HmIP-DRBLI4 User Manual - Italian, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info