Manual HomeMatic HM-Cen-O-TW-x-x-2 (page 34 of 52) (English, German)

650402

Zoom out

Zoom in

1/52

Start-up

7 Start-up

7.1 Wall mounting

Please use the two screws and plugs supplied for wall mounting.

When selecting a mounting location and drilling in the

vicinity of switches or socket outlets, make sure that there

are no cables in the wall.

Do not mount the Central Control Unit in the vicinity of other

sources of interference (e.g. WLAN or DSL routers). For

notes on rectifying malfunctions, see Section 10.

• Hold the drilling template supplied (see additional sheet) at your

intended mounting location and align it vertically and/or horizon-

tally.

• Use a pen to mark the bore holes A and B (as shown on the

drilling template) on the wall through the template.

• Drill the two marked holes into the wall with a diameter of 5 mm.

Insert the plugs in the holes. Turn the screws into the plugs so

that they protrude from the wall by approx. 1.5 mm. Working from

above/from the right, hang the device using the brackets on the

back (J) (see page 34) behind the screw heads.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of HomeMatic HM-Cen-O-TW-x-x-2 in the language / languages: English, German as an attachment in your email.

The manual is 1,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

HomeMatic HM-Cen-O-TW-x-x-2 Manual

Product: