Manual HomeMatic HM-CC-TC (page 51 of 60) (English, German)

531821

Zoom out

Zoom in

1/60

Shut down the time program by setting 00:00 hrs. as the end

time. 00:00 is automatically set as the end time, if 24 temperature

phases have been created.Program completion is indicated on

the display with "OK".

8.2 Setting the date and time "DAT"

Call up special function "DAT". Press the "OK" button to set the

time and date. Proceed as described previously in section "Start

up".

8.3 Actuator status query "VST"

You can show the opening status of the actuator, the battery sta-

tus and the status of the radio connection under this menu point.

Call up special function "VST".

Press the "OK" button to call up the information on the actuators.

The valve opening is indicated as a percentage on the display. If

the battery is low, the battery symbol will also be shown. If the

radio connection between the valve drive and the controller is

interrupted, the antenna symbols will also ﬂash. Use the setting

dial to switch between the taught actuators.

8.4 Shutter contact status queries "WST"

You can query the current status of the shutter contacts or the

door window rotary handle sensors under this menu point.

Call up special function "WST".

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of HomeMatic HM-CC-TC in the language / languages: English, German as an attachment in your email.

The manual is 0,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

HomeMatic HM-CC-TC Manual

Product: