574679
29
Zoom out
Zoom in
Previous page
1/68
Next page
27
In order to insert & seat the gasket properly, we recommend as follows:
1) Make sure blade housing is completely dry - particularly in the gasket groove.
2) When looking at the gasket, one side has a slightly concave appearance, the other
side is fl at- below is a diagram of a cross section of a gasket:
3) Insert the gasket with the fl at side down toward the groove.
4) Using the tip of a spoon or something similar, press into the concave side of
the gasket into the gasket groove. Go all around the gasket to make sure that it is
completely seated and tight and there are no places where the gasket is sticking up
out of the groove.
BE SURE TO INSPECT THE GASKET AFTER THE FIRST USE AND EACH
SUBSEQUENT USE TO MAKE SURE IT WAS INSTALLED AND HAS NOT
BECOME LOOSE OR DAMAGED.
Stubborn Cleanup
If ingredients dry inside the Baby Bullet, make your clean up a snap by fi lling the
cup half full with soapy water twist on the blade and blend it for 10-20 seconds on
the power base. That will loosen the stuck ingredients and with a light scrub, you’ll
be all done.
DO NOT USE ANY OF THE BABY BULLET COMPONENTS (CUPS, LIDS,
BLADES, BATCH BOWL, BATCH TRAY, MOTOR) IN THE MICROWAVE OVEN
FOR ANY REASON.
Cleaning the Baby Bullet Power Base
For the most part the Power Base doesn’t really get dirty, but if you neglect to
twist the blade on to the cup tightly, liquids can leak out and get into the base and
activator buttons.
Here’s how to clean it up.
Step 1:
The most important thing is to UNPLUG the Power Base!
Step 2: Use a damp rag to wipe down the inside and outside of the Power Base.
NEVER SUBMERGE THE POWER BASE IN WATER OR PLACE IT IN THE
DISHWASHER
NEVER PUT YOUR HANDS OR UTENSILS NEAR THE MOVING BLADE AND
NEVER USE YOUR HANDS OR UTENSILS TO PRESS THE ACTIVATOR
BUTTONS DOWN WHILE THE POWER BASE IS PLUGGED IN.
Baby
Baby
Cleaning the Baby Bullet Power Base
Baby
Cleaning the Baby Bullet Power Base
For the most part the
Baby
For the most part the
Power Base
Baby
Power Base
twist the blade on to the cup tightly, liquids can leak out and get into the base and
Baby
twist the blade on to the cup tightly, liquids can leak out and get into the base and
activator buttons.
Baby
activator buttons.
Here’s how to clean it up.
Baby
Here’s how to clean it up.
Step 1:
Baby
Step 1:
Bullet,
Bullet,
If ingredients dry inside the Baby Bullet, make your clean up a snap by fi lling the
Bullet,
If ingredients dry inside the Baby Bullet, make your clean up a snap by fi lling the
cup half full with soapy water twist on the blade and blend it for 10-20 seconds on
Bullet,
cup half full with soapy water twist on the blade and blend it for 10-20 seconds on
the power base. That will loosen the stuck ingredients and with a light scrub, you’ll
Bullet,
the power base. That will loosen the stuck ingredients and with a light scrub, you’ll
DO NOT USE ANY OF THE BABY BULLET COMPONENTS (CUPS, LIDS,
Bullet,
DO NOT USE ANY OF THE BABY BULLET COMPONENTS (CUPS, LIDS,
BLADES, BATCH BOWL, BATCH TRAY, MOTOR) IN THE MICROWAVE OVEN
Bullet,
BLADES, BATCH BOWL, BATCH TRAY, MOTOR) IN THE MICROWAVE OVEN
Bullet,
Cleaning the Baby Bullet Power Base
Bullet,
Cleaning the Baby Bullet Power Base
Power Base
Bullet,
Power Base
LLC
LLC
If ingredients dry inside the Baby Bullet, make your clean up a snap by fi lling the
LLC
If ingredients dry inside the Baby Bullet, make your clean up a snap by fi lling the
cup half full with soapy water twist on the blade and blend it for 10-20 seconds on
LLC
cup half full with soapy water twist on the blade and blend it for 10-20 seconds on
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Homeland BabyBullet at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Homeland BabyBullet in the language / languages: English as an attachment in your email.

The manual is 10,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info