6
GB
INSTRUCTIONS FOR USE:
IMPORTANT - Preparing the appliance for use
The Shiatsu Massager comes with a screw located on the back of the unit to protect the massage mechanism
during shipment, which must be removed before the first use to allow the shiatsu feature to function. Use the
provided Allen key. Then, properly dispose of the screw.
WARNING – Failure to remove screw may cause permanent damage to the appliance.
Strapping System
The Foldable 3D Shiatsu and Vibration Massaging Cushion incorporates a unique strapping system which
allows you to fasten it to almost any chair. Just slip the straps over the seat or chair and adjust fastening straps
to secure. Your massager won’t slip or slide away.
Cushion Folding Instructions
Make sure the cushion is unplugged and the cord is
properly secured in the pocket between the
cushion and seat. With cushion sitting upright in
the chair, fold the flaps on the sides of the cushion
in toward the center and hold them there (see Fig.
1). Next, fold the flaps on the sides of seat in toward
the center (see Fig. 2). Fold the seat up toward the
cushion (see Fig. 3). Secure the seat to the cushion
with the elastic strap on the back of the cushion
(see Fig. 3).
Carry Bag Instructions
Make sure the cushion is unplugged and the cord is
properly secured in the pocket between the
cushion and seat. With cushion sitting upright in
the chair, remove the bag from the compartment
on the cushion (see Fig. A). Unzip the bag and slide
it over the cushion from the top down (see Fig. B).
Zip the bag and carry the cushion by the handles
on the side of the bag (see Fig. C).
Note: Do not use this product for more than 20 mins at a time.
Fig. 1 Fig. 2
Fig. 3
Fig. A Fig. B
Fig. C
The actual product materials and fabrics
may vary from the picture shown.
M
oving Shiatsu
massage mechanism
