518342
7
Zoom out
Zoom in
Previous page
1/41
Next page
GB
Specifications
Specifications can be changed without notice.
Cleaning and maintenance
1. The blood pressure monitor, the cuff, and the storage box can be rinsed with
a soft cloth moistened with a mild detergent and wiped dry with a soft, dry
cloth or paper towel. Never use strong, caustic detergents as these may
cause damage to the synthetic parts. Also, never use diluents, alcohol or
kerosene to clean the device.
Safety and electrical devices
1. When the device is not used, store it in the storage box.
2. Only use the device on the wrist
3. When the device is not used for extended periods of time, it is
recommended that you remove the batteries to avoid leakage which may
cause damage to the device.
1312
GB
Error search
If irregularities occur during use, please check the following items before you
contact your vendor:
If the device still does not function, please contact the store where the device
was purchased. Do not attempt to open the device or adjust any of the inner
parts yourself.
Symptom Possible reasons Correction
The device does not
switch on when the
stop/start button is
activated.
A change of batteries is required. Change to two new AAA
batteries.
Battery polarities have been
positioned incorrectly.
Position the batteries
correctly.
EE measurement
error symbol in the
display, or the blood
pressure measurement
is excessively low
(or high).
The cuff is fitted incorrectly. Fit the cuff again so that it is
positioned correctly.
Did you talk or move during
measurement?
Restart measurement and
keep the arm or wrist steady
during the entire
measurement.
Shaking of the arm or wrist while
wearing the cuff.
E1 error symbol on the
display.
Airflow is irregular. Check the cuff’s connection.
Restart measurement.
E2 error symbol on the
display.
The inflation pressure exceeds
300mmHg.
Switch off the device and
restart measurement.
E3 error symbol on the
display.
Data error. Remove and reinsert
batteries.
-- on the display. Calibration warning. See page 45 for more
information.
Power source 2 AAA batteries
Measurement standard Oscillometric
Measurement zone Pressure: 40-250 mmHg
Pulse: 40-199 beats per minute
Accuracy Pressure: ±3 mmHg
Pulse: Reading inside ±5%
Pressure sensor Semi conductor
Inflation Automatic - pump-driven
Deflation Automatic - overpressure valve
Memory capacity 60 measurements per user (120 total)
Auto off 1 minute after latest use
Conditions during use 10˚C - 40˚C
15-90% RH max
Storage conditions -20˚C - 70˚C
0-95% RH max
Cuff circumference 13.5-22 cm
Age limitation 18 years
Classification BF type. Device and cuff are designed to
provide special protection against electric shock.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Homedics BPW-200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Homedics BPW-200 in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info