623780
13
Zoom out
Zoom in
Previous page
1/17
Next page
ENGLISH
13
OPERATING INSTRUCTIONS
Intended use
• The device is intended only for the preparation of food. Any other use can lead to damages of the device or
injuries.
Unpacking and control
• Remove the packaging material and check the device for damages.
• Mount the device once to check the correct fit.
• Do not operate the device, if it is damaged in any way, but take it immediately back to the dealer.
Operating time
• The device is not suitable for continuous operation.
• Do not use the device continuously longer than 10 seconds at a time.
• The in between pauses must be at least 1 minute.
• Non-observance can lead to motor damage.
Operation
• Clean the collection container (5), the splash guard (3) and the cutting unit (4) as described in the chapter
Cleaning and Care.
• With the device, you can chop or mince food. Always use the device in vertical position with the
cuttingunit(4) downwards.
• Make sure, the device is turned off and disconnected from the mains.
• Place the non-slip coaster with the collection container sitting thereon on the worktop. The non-slip
underside must show downwards.
• Attach the cutting unit (4) to the crosspiece in the middle of the container.
• Prepare your food for chopping or shredding according to the processing instructions.
• Position the splash guard (3) on the collection container (5) correctly. The splash guard on the collection
container snaps in, if it is in the correct position. The device does not function, if the splash guard does not
sit on the collection container correctly.
• Now put the drive unit on the device and connect the plug of the device to the mains.
• Note: Make sure, the drive unit (1) with the splash guard (3) and the cutting unit (4) sit tight and properly on
the collection container, prior to turning on the device.
• Now press the drive unit down for a maximum of 10 seconds. Your food will be chopped. If the food
shouldn´t yet have the desired consistency, make a pause of 1 minute to allow the device to cool off and
repeat the chopping process.
• Before emptying the collection container, please disconnect the plug from the mains. Remove the drive unit
and carefully remove the cutting unit. Now you can take the chopped or hashed food out of the collection
container.
• Before replacing any accessories or additional parts, always disconnect the device from the mains.
• Following, clean the device as described in chapter Cleaning and Care.
MZ5002W_R-IM-DE-EN-V1.indb 13 13/11/2009 3:32 PM
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Home Electric MZ5002W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Home Electric MZ5002W in the language / languages: English, German as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info