623748

Home Electric HS3002 Manual

19
Zoom out
Zoom in
Previous page
1/24
Next page
19
ENGLISH
Cutting with attachment combs
The equipment can be used with or without attachment
combs depending on the hair cut you want.
The attachment combs give the following cutting lengths
(see table)
Fixing attachment comb
• Press the attachment control button (D) to position
"1" for snap on or off attachment comb.
• Grasp the required attachment comb by the side
guide brackets (Fig. 3a) and carefully place it in the
notch in the equipment until it snaps into place
(Fig. 4)
• Set the required hair length by pressing the button
(D) to adjust the attachment comb up & down.
• Adjustment is carried out at the side of the
equipment by pressing the cutting length control
button.
• The attachment comb will be locked automatically
when the equipment is switch on.
Removing attachment comb
• Move the control Button (D) to position"1"
• Grasp the attachment comb by the two side guide brackets and pull it out of the
equipment (Fig. 3b).
Tips for a successful styling.
• Make sure you choose the correct attachment comb and setting.
• Make sure that the equipment is clean and the battery is charged.
• Hold the equipment in such a way that the flat side of the attachment comb is pointing
towards the head and guide it slowly but steadily through the hair (Fig. 8).
• As a general rule, start at the sides or on the neck and cut towards the middle of the
head (Fig. 9) Then cut the hair on the forehead towards the middle.
• Cut hair more than 40 mm long with a hairstyling comb (Fig.10) or hold it between your
fingers (Fig.11).
• Stop cutting from time to time, comb the hair out and check the result so far.
• Regularly shake and blow bair out of the equipment. If you have collected a lot of hair
in the attachment comb, take it out clean it and blow it clear.
• Clean the equipment after each use (Fig. 6/7).
Setting
1 4 24
2 6 26
3 7 27
4 9 29
5 10 30
6 12 32
7 13 33
8 15 35
9 16 36
10 18 38
11 19 39
12 21 41
13 22 42
Hair length in mm
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Home Electric HS3002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Home Electric HS3002 in the language / languages: English, German as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info