589852
37
Zoom out
Zoom in
Previous page
1/75
Next page
HOLUX FunTrek 132
29
The sensor is disconnected, it displays as “---”;
The sensor is connected and the signal is good, it displays the data and the icon is blinking;
The sensor is connected, but the signal is poor and the display data shown is below than the minimum
value for 1 to 5 seconds, cadence and speed data decreases, the icon does not blinking;
The heart rate data is displayed as the last time, the icon does not blinking;
The sensor is connected, but the signal is poor or the display data shown is low for 6 seconds to 1 minute,
cadence and speed data are 0, and the icon is not blinking. The signal data is displayed as “???”, the alert
beep is on in every 10 seconds;
The sensor is connected and the poor signal lasts more than 1 minute, the cadence, speed and heart rate
are displayed as “---”.
FunTrek 132 training information range is: Heart rate 30-220bmp, Cadence 20-255rpm, Speed 2.4-244km/h.
Cadence, speed and heart rate data which are higher than the maximum value, the display will continue to
show the maximum value.
On the training information page, press the button to flip to the HR or Cadence graphics page.
Press the button to switch axis. In the graphics, the dark horizontal bands is the setting rage of heart
rate/cadence. Browse the charts for reference.
Click the heart rate/cadence chart at the top of the "altitude" or "speed" block to enter the information
option lists. Select different information to display on the chart.
In training process, press the “Back” button and a message appears on the screen. Press the button
to exit the training, or press the button to continue training.
When training is completed, pops up the training is finished. Press the button to ends the training and
saves records. User can view multiple training records in the track management.
“Last training”: You can review the detail information of last training. Press the
button to refresh the
information.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Holux FunTrek 132 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Holux FunTrek 132 in the language / languages: English as an attachment in your email.

The manual is 8,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Holux FunTrek 132

Holux FunTrek 132 User Manual - German - 77 pages

Holux FunTrek 132 User Manual - French - 77 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info