* Water inlet hose kinked/bent * Eliminate kink or bend from
due to improper installation. Inlet hose.
Chipping or breaking * Improper loading of dishes. * Do not overload dish rack. Load
glassware glasses on the upper rack only,
not over dish rack pins. Glasses
loaded over dish rack pins are
not properly supported and
subject to damage.
Water remains in bottom * A small amount of water * This is necessary to keep the
(in sump area) is normal. pump primed and is drained
automatically at the beginning
of each cycle.
* Excessive amount of water; * Allow dishwasher to complete
cycle not completed. full cycle.
Dishwasher cann’t stop * the draff is too much; * drain the water out and clear the filter
