35911
9
Zoom out
Zoom in
Previous page
1/12
Next page
Please read this manual carefully before using and keep it properly for future use.
Warning: Any maintenance and repair must be handled by a professional technician.
Please don’t try to repair it yourself, this may cause dangerous situations.
Safety regulations
This machine isn’t suitable for children.
When the cord is damaged, it must be replaced with the manufacturer or a service point, by a qualified
person, to prevent further damage.
Vacuum cleaner
1.Power cord
2.Power cord rewinding pedal
3.Power regulation button
4.On/Off switch
5.Handle
6.Handle for dust bin
7.Dust bin
8.Hose socket
9.Top
10.Bottom
11.Big wheel
12.(Plastic) tube
13.Floor brush
14.Integrated brush & nozzle
15.(Flexible) hose
Accessories
1 hose set, 1 tube, 1 integrated brush nozzle
Operation methods
1. Turn the black knob to open the telescope tube.
2. Connect the hose to the top of the tube.
3. You can connect different nozzles and brushes to the hose, they all serve a different purpose.
The floor brush for hard floor or carpet; the integrated brush nozzle or the special wall piece for cleaning:
edges, sofa, curtains or even the stove.
4. Hold the plug and pull the cord. Put the plug in the socket and push the on/off button.
5. The machine will start working, no speed is established yet. If you want to set the speed, you have to turn
the speed level after the plug is connected to the socket.
6. You can carry the machine by holding the handle.
7. Winding up the cord: pull the plug from the socket. Push the rewinding button, the cord will be withdrawn.
8. After operating; push the on/off button, the machine will stop. Remove the plug from the socket.
Maintenance:
1. To remove the dust bin from the vacuum cleaner first push the handle upwards.
You can now remove the dust bin from the vacuum cleaner.
2. Now remove the lid from the dustbin by turning it counter clockwise.
3. It is possible to remove the filter and clean it. To remove the filter, turn it counter clockwise.
4. The metal filter is ‘clicked’ into place, and you can remove it by pulling it. To reinsert the filter, push firmly.
5. You can clean the white and metal filter separately in a wash of lukewarm water and rinse with cold water.
6. Reinsert the filter by turning it clockwise.
7. After removing the dust you can replace the lid on the dust bin by turning it clockwise.
Attention: if you didn’t place the dustbin right, you can’t connect the top with the clip.
Motor filter: It is wise to wash this occasionally with water, do this when it is clearly filthy.
Let the air dry it then replace it. When the filter is damaged you have to replace it.
Replacing the airflow filter (backside of the vacuum cleaner): Push the airflow plate down to open it and to
replace the filter. The plug must be removed from the socket during this operation ( and any maintenance).
9
12
15
13
14
23
4
56
78
1
9
10
11
BLF220Hman(ALL).qxd 26-07-2006 08:35 Pagina 9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Holland Electro BLF220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Holland Electro BLF220 in the language / languages: Dutch as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info