668009
9
Zoom out
Zoom in
Previous page
1/64
Next page
EN
2. Recharging Home Base
When the robot completes its cleaning cycle or the battery charge level is 10%, the robot will return to
the Recharging Home Base automatically.
Installation
1. Position Home-base on an even floor surface against wall
2. Position it at location with at least a 0,6 m
(2 ft.) clearance around.
3. Connect the AC adaptor to the power
socket on the rear side. Only use the AC
adaptor provided
4. Always keep the Recharging Home Base
power plugged in.
Docking Test
1. Leave the robot on the floor somewhere
near the Recharging Home Base.
2. Press the “Home” button on the remote control.
3. The robot will return to the Recharging Home Base automatically.
4. If the robot fails to dock, check the installation process to make the necessary adjustments to
the Recharging Home Base until the robot can dock properly.
Pairing the Robot with Recharging Home Base
1. Keep press UV button until display show Cd.
2. Press Time button on Recharging Home Base, you will hear signal twice and the VAC button will
blinks. Pairing completed with success.
Robot Battery Recharge
When The Power Button on the robot blinks red, this indicates that the battery level is low.
The robot will shut down the vacuum engine and go back to the Recharging Home Base.
Users can also use the AC adaptor to plug into the robot directly to recharge the battery.
When the battery is fully recharged, the Power Button will light up a solid blue. The recharging
process is about 3 hours.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hobot RoboJet Air AH-157 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hobot RoboJet Air AH-157 in the language / languages: English, Polish as an attachment in your email.

The manual is 4,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info