703772

Hoberg V8216-3 - 08684 Manual

18
Zoom out
Zoom in
Previous page
1/60
Next page
EN 18
• The device should only be used if it has been fully and correctly assembled! The dust
container and the fi lters must be inserted and must not be damaged. If the dirt were
to get inside the motor unit, this could damage the motor.
• Switch off the device and pull the mains plug out of the plug socket if an error occurs during
operation, when there is a power cut or before a thunderstorm.
• The device must be switched off when inserting or removing the mains plug. Always pull the
mains plug and never the mains cable to disconnect the device from the mains power. Never
pull or carry the device by the mains cable.
• Protect the device from heat, naked fl ames, sub-zero temperatures, persistent moisture, wet
conditions and collisions.
• Use only original accessories from the manufacturer. If accessories which are not authorised by
the manufacturer are used, any warranty claim is void.
• Do not lay or place any heavy objects on the mains cable.
Before Initial Use
Remove all packaging materials and any possible protective fi lms used for protection during
transportation. Never remove the rating plate and any possible warnings!
Please note that there may be dirt residues in the dust container or in the fi lters. These
residues can be attributed to quality checks and do not constitute a defect with the device.
Accessories
The fl oor nozzle is suitable for both carpets and hard fl oors. The foot switch allows you to
change between carpet and hard fl oor. For hard fl oors, a brush is extended on the underside of
the nozzle.
The combi nozzle is a combination of a crevice nozzle and brush nozzle. The brush attachment
can be fl ipped up or fl ipped down:
• The crevice nozzle is suitable for upholstery and for all nooks and crannies that cannot be
reached with other nozzles.
• The brush nozzle is suitable for all uneven objects, furniture, lamps, profi les and skirting
boards, window ledges, etc.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hoberg V8216-3 - 08684 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hoberg V8216-3 - 08684 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info