623059
115
Zoom out
Zoom in
Previous page
1/148
Next page
12. Maintenance and upkeep
111
12.2 Drawgear
Coupling ball on base vehicle
Ensure that the coupling ball meets the required dimensions and is
undamaged, clean and free of grease. When using dacromet-coated
(dull silver anti-corrosion coating) as well as lacquered coup-ling balls,
the coating must be removed completely with sandpaper (200-240
grain) so that it does not create deposits on the friction lining. The
metal surface of the coupling ball must be bright. A damaged or dirty
coupling ball causes increased wear and tear on the friction pads; a
greased coupling ball negates the stabilizing eect. Thinning solvents
or spirit are both suitable for cleaning.
1
Rules for greasing and oiling
Movable parts such as pins and hinged parts on the hand brake
lever and deexion lever of the ramp should be oiled lightly.
Lightly grease the stationary parts on the case of the overrunning
equipment
j
after every 5,000 kilometres of driving.
IMPORTANT: The friction elements of the WS 3000 safety hitch
may NEVER be oiled or greased.
Check from time to time to ensure that the bearing surfaces of the
thrust rod are not jammed.
Clean and oil all movable and stationary parts regularly.
Greasing and oiling
Regularly examine and grease the sliding parts and stationary
parts of the chassis. If the caravan is used seldom, yearly mainte-
nance is required.
Rubber spring axles require no maintenance.
The axle(s) of the caravan is (are) tted with compact
wheel bearings. The cylinder hub, compact bearings
and axle nuts form a closed unit. The compact bearings
are free of maintenance due to their special grease.
You can nd further guidelines in the operating
instructions from the axle supplier.
For safety reasons, the spare parts for heating de-
vices must conform with the manufacturer's instruc-
tions. They must be installed by the manufacturer or
an authorised representative.
Tension ball coupler
Keep the friction linings inside the tension ball coupler clean and free
of grease (Fig. 5). When the friction linings are dirty, the surface can
be cleaned with 200-240 grain sandpaper. Then clean with petroleum
ether or spirit. All movable bearings and bolts are easy to grease. By
regular upkeep and maintenance of your WS 3000, you increase its
overall life span, function and safety.
Bearing surfaces on the casing of the over-
run coupling
Ball coupling
115


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hobby PRESTIGE 2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hobby PRESTIGE 2016 in the language / languages: English as an attachment in your email.

The manual is 16,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hobby PRESTIGE 2016

Hobby PRESTIGE 2016 User Manual - German - 148 pages

Hobby PRESTIGE 2016 User Manual - Dutch - 148 pages

Hobby PRESTIGE 2016 User Manual - French - 137 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info