623059
23
Zoom out
Zoom in
Previous page
1/148
Next page
19
3. Chassis
Unhitching
Release the overrun coupling so that the gangway bellows
o
are expanded.
Release the contact-breaking cable and pull out the 13-pole plug.
Slowly pull the lever upwards into position
k
to switch o the
stabilizing device.
Pull the lever backwards and, at the same time, further into
position
j
so that the coupling opens.
After the front landing wheel has been rotated out, the caravan
can be disconnected from the base vehicle.
1
2
3
6
Activation of the stabilization system
To activate the stabilization system, the operation lever must be
moved downward out of the closed position
k
until it locks
in
l
. The spring corpus will become tense in the process,
so that contact pressure is created on the coupling ball via the
friction elements. Afterward, the operation lever lies approxima-
tely parallel to the drawbar axle.
Shuto of the stabilization system
Bring the operation lever slowly upward into the open position
(position
k
) to shut o the system.
3
4
Inspection of hitch
The ball coupling is closed when the lever rests in positi
on
k
or
l
and the green pin of the hitching display
m
is visible.
If the WS 3000 is not properly attached to the cou-
pling ball, the caravan can detach from the base vehi-
cle. It must not be possible to release the ball coupling
from the coupling ball when the front landing wheel is
lowered.
Although it is possible to drive without activating the
stabilizing device, e.g. when shunting, we do not
recommend that you do so.
If you do not plan on using the caravan for a longer
period of time, you should store it with the ball cou-
pling closed.
5
Controlling the stabilizing device
After having hitched and activated the stabilizing device, you can
then control the state of the friction pads:
- If the wear indicator
n
is in the green (OK) zone, the friction
pads are suitable for driving.
- If the indicator is in the yellow transition zone, the friction pads
must be replaced without delay.
- If the indicator is in the red (STOP) zone, there is no stabilizing
function. Permission to drive at 100 km/h is immediately
cancelled.
Control pin
Activated stabilising device
Releasing the ball coupling
Wear indicator for the friction pads
Only uncouple the camper when it is in a horizontal
position, never anywhere near uphill or downhill slopes.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hobby PRESTIGE 2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hobby PRESTIGE 2016 in the language / languages: English as an attachment in your email.

The manual is 16,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hobby PRESTIGE 2016

Hobby PRESTIGE 2016 User Manual - German - 148 pages

Hobby PRESTIGE 2016 User Manual - Dutch - 148 pages

Hobby PRESTIGE 2016 User Manual - French - 137 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info