623055
116
Zoom out
Zoom in
Previous page
1/148
Next page
12. Maintenance and upkeep
112
1
Changing the friction lining
It is very easy to exchange the friction pads
j
when they are
worn out. Messrs. Winterho oer a corresponding set of spare
parts. Please note the detailed instructions for assembly in the
manufacturer's spare part kit.
Noises
Certain noises can occur during the course of the drive; these
noises, however, have no inuence on the operative eectiveness
of the tension ball coupler.
Possible causes of these noises can be:
1. a dacromet-coated coupling ball on the base vehicle.
2. A galvanized or varnished coupling ball on the base vehicle.
3. A damaged, rusty or dirty coupling ball on the base vehicle.
4. dirty friction elements
j
on the tension ball coupler.
5. the towbar or tie rod in the linings of the overrunning equip
ment are running dry.
Hints
For 1., 2. and 3.:
Sand down the surfaces of the coupling ball and clean them with a
thinning solvent or spirit.
for 4:
Clean the surface of the friction elements with sandpaper (200-240
grain) and then clean with petroleum ether or spirit.
for 5:
Use a lubricating nipple to grease the linings. Pull back the shock
absorber and grease the bare towbar.
1
12.3 Brakes
Initial inspection
The wheel brakes that have been installed are drum brakes that do
not adjust automatically. (Exception: Premium)
To ensure trouble-free brake performance, the wheel brakes must
be adjusted regularly.
The brakes must rst be inspected after you have driven 500 km
(including the Premium model). Have them inspected again after
every 10,000 km of driving, but at least once every year. Inspections
must be documented in the KNOTT service manual by the authorised
specialist who carries out the inspection. These documented reports
are just as much a prerequisite for any possible guarantee claims as
is the compliance with the regulations for maintenance and upkeep.
Friction pads
Diagram of friction pads
116


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hobby ONTOUR 2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hobby ONTOUR 2016 in the language / languages: English as an attachment in your email.

The manual is 16,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hobby ONTOUR 2016

Hobby ONTOUR 2016 User Manual - German - 148 pages

Hobby ONTOUR 2016 User Manual - Dutch - 148 pages

Hobby ONTOUR 2016 User Manual - French - 137 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info