Manual HMM smartLAB global W nG (page 52 of 76) (English, German)

666670

Zoom out

Zoom in

1/76

Function check

You can carry out a function check with the Check Strip which is

included in your meter set. You do not have to do the function

check before every measurement. It helps you to control if your

smartLAB

nG meter works properly, from time to time, though.

1. Insert check strip into the meter:

Make sure your check strip is inserted with writing to top. The meter

will turn on automatically and the display will show „CHK“.

2. Check message in LCD display:

The function check will take approx. 3 seconds. The check can pro-

duce the following messages on the display:

• „OK” - your meter works properly

• „FAL“- change batteries and check again. If the message still ap-

pears, please refer to your local supplier.

After showing “OK” the device will start to send measured data. If

device has not been set yet by the system it will be set now. After-

wards the data will be shown on the screen.

3. Remove check strip:

The meter will turn off automatically after removing the check strip.

Please keep the check strip in the soft case of the meter.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of HMM smartLAB global W nG in the language / languages: English, German as an attachment in your email.

The manual is 1,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

HMM smartLAB global W nG Manual

Product: