30196
4
Zoom out
Zoom in
Previous page
1/4
Next page
OPERATION CHECK HELPFUL HINTS
6 7
1. Plug the switch harness and servo connectors into the proper slots.
The connectors are polarized, so they will fit into the receiver one way only.
NEVER USE EXCESSIVE FORCE TO PLUG IN OR PULL OUT CONNECTORS.
2. Always turn the transmitter power switch "on" first, before the receiver switch to
avoid damaging your equipment.
3. Move the trim levers to the "neutral" position.
4. Check to see the servos move in the proper direction when the joysticks are moved.
If you wish to change the direction of rotation, use the servo reversing
switches on the front of the radio.
5. If you wish to have more forward throttle stick movement, push down the neutral
position adjustment lever, this will give 30% more forward movement.
Antenna
Both the transmitter and the receiver antenna must be fully extended when in use.
Do not cut off any excess receiver antenna wire or bundle it up as this will cut down
on the operating range of the system.
Changing Frequency
Hitec offers receiver and transmitter crystals to be used in changing the frequency of
your Ranger 2N system. Caution: The frequency can be changed only within the
same band, you cannot change from 75MHz to 72 or 27MHz just by changing crystals.
Water, Dust and Fuel
Take suitable measures to protect your system from water, dust, oil and fuel.
Servo Linkage
Install your linkages to be free from binding and slop. If you hear severe "humming"
from the servo, it is an indication the servo is working too hard and the geometry
of the linkage should be adjusted.
T hrottle Ratchet
The spring mechanism on the throttle stick may be disconnected and an optional
ratchet part # 58314 is available to fit on the throttle gimbal to facilitate a ratchet
effect with detents.
NORMAL POSITION : FORWARD : BACKWARD = 50 : 50
LEVER DOWN : FORWARD : BACKWARD = 70: 30
Congratulations again and have fun!
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitec RANGER_IIN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitec RANGER_IIN in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info