30144

Hitec AGGRESSOR_SRX Manual

12
Zoom out
Zoom in
Previous page
1/16
Next page
E) Timer
- After entering the Main Edit mode press the "FUNC" button to scroll to the Timer menu.
- Press the "SEL" button to move the curser to select minutes. Time can be set from 01:00 up to 99:00 minutes.
- To activate the timer when using the radio, push the "SEL" button.
- To pause the timer, push the "SEL" button again; then, push it again to restart.
- To cancel the timer, push the "FUNC" button.
- Note: When the timer reaches 00:10 seconds, you will hear a beep for each second counting down
until it reaches 00:00.
- Press the "FUNC" button to scroll to the next menu, or turn the transmitter off and back on to use the radio.
F) Exit
- Once you have set all the parameters in this menu you can exit by simply turning the radio off,
and then back on again to operate.
- If there is still more programming needed push the "FUNC" button to scroll through the menu again.
- Scrolling only moves in one direction, so if you miss a screen, you must scroll through all of the
menus until you get back to the screen you want.
D) 3rd Channel Switch Select:
AUX
- After entering the Main Edit mode press the "FUNC" button to scroll to the 3rd Channel Switch Select menu.
- Push the "DATA" + and - buttons to Select either "Linear" or "Shift".
- Linear is activated via the trim tab on the right side of the steering column and can be moved to
any position you select. This is typically used for mixture control in nitro boats, but you can use it for
other functions if needed.
- Shift is activated by the momentary button located on the left of the steering wheel. This is used to
shift vehicles such as the T-Maxx or similar type vehicles.
- #Tip: Use the knuckle of your left thumb to push the button to shift. When the button is pushed the
AUX servo will travel to one end. When it is pushed again it will travel to the other end.
This travel can be set in the EPA screen in the programming mode for fine tuning.
- Press the "FUNC" button to scroll to the next menu, or turn the transmitter off and back on to use the radio.
R
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitec AGGRESSOR_SRX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitec AGGRESSOR_SRX in the language / languages: English as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info