572116
16
Zoom out
Zoom in
Previous page
1/130
Next page
English
15
M12 × 45
kgf·cm
1200
1000
800
600
400
200
0
N·m
120
100
80
60
40
20
0
0 1 2 3
M10 × 30
kgf·cm
1000
800
600
400
200
0
N·m
100
80
60
40
20
0
0
1 2 3
M8 × 30
kgf·cm
1000
800
600
400
200
0
N·m
100
80
60
40
20
0
0
1 2 3
Tightening torque
Tightening torque
Tightening torque
Tightening time: sec.
(Steel plate thickness
t = 10 mm)
Tightening time: sec.
(Steel plate thickness
t = 25 mm)
Tightening time: sec.
(Steel plate thickness
t = 25 mm)
1400
1200
1000
800
600
400
200
0
140
120
100
80
60
40
20
0
M14 × 50
0 123
kgf·cm N·m
1400
1200
1000
800
600
400
200
0
140
120
100
80
60
40
20
0
M12 × 45
0 123
kgf·cm N·m
1000
800
600
400
200
0
0 123
100
80
60
40
20
0
M10 × 30
kgf·cm N·m
Ordinary bolt
High tension bolt
Ordinary bolt
High tension bolt
High tension bolt
Ordinary bolt
Fig. 22
For WH12DM2
(5) Using optional parts (WR12DM2, WR9DM2)
The tightening torque is reduced a little when an
extension bar, universal joint or a long socket is
used.
(6) Clearance of the socket (WR12DM2, WR9DM2)
A worn or deformed hex. or a square-holed socket
will not give an adequate tightness to the fitting
between the nut or anvil, consequently resulting in
loss of tightening torque.
Using an improper socket which does not match to
the bolt will result in an insufficient tightening torque.
Matching socket and bolt sizes are shown in Table 1,
2, 3 and 4.
(7) Tightening torque varies, depending on the battery’s
charge level. (WR12DM2, WR9DM2)
Fig. 28 and 29 show examples of the relationship
between tightening torque and the number of
tightenings, for WR12DM2 and WR9DM2. As shown,
tightening torque gradually weakens with the increase
in the number of tightenings. In particular, as the
torque decreases very close to the complete discharge
(“a” margin in graph), the unit’s impact weakens, the
number of time impacts declines and tightening
torque drops off abruptly. If this occurs, check torque
level, then recharge the battery if necessary.
For WH9DM2
Tightening time: sec.
(Steel plate thickness
t = 10 mm)
Tightening time: sec.
(Steel plate thickness
t = 25 mm)
Tightening time: sec.
(Steel plate thickness
t = 25 mm)
Tightening torque
Tightening torque
Tightening torque
High tension bolt
High tension bolt
Fig. 23
High tension bolt
Ordinary bolt
Ordinary bolt
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi WR9DM2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi WR9DM2 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info