Manual Hitachi WR8DH (page 8 of 54) (English, German, Dutch, French, Italian, Spanish)

622350

Zoom out

Zoom in

1/54

English

3. Extension bar: Code No. 873633

The extension bar is convenient for working in very

restricted spaces or when the socket provided cannot

reach the bolt to be tightened.

CAUTION

when the extension bar is used, the tightening

torque is reduced slightly compared with the

ordinary socket.

4. Universal joint: Code No. 992610

The universal joint is convenient for impacting nuts

when there is an angle between the socket and

wrench, or when working in a very narrow space.

5. Duct Socket:

This is used for tightening bolts and nuts on flange

sections of air conditioners, type ducts, etc.

6. Corner attachment (Model EW-14R)

Use this attachment only when the machine is

applied to the nut or bolt at the right angle.

7. 9.5 mm adapter: Code No. 317383

Use this adapter when using the socket that has

a square -head- drive dimention of 9.5 mm.

Code No.

Hexagonal width

across flats (mm)

993658 12

992613 13

992615 14

8. Bit adaptor: Code No. 991476

This is used for tightening small screws (M6 ~ M8).

NOTES

(1) This adaptor is set only on the anvil (drive angle)

of the main unit. The bit adapter cannot be attached

to the special accessory anvil (square drive).

(2) Before starting work with the adapter, tighten a few

screws with it to make sure it’s tightening with the

appropriate torque.

(3) Tightening speed will be greatly reduced when

driving wood, tapping or other similar screws.

䢇 Applicable plus driver bit

Optional accessories are subject to change without

notice.

APPLICATION

䡬 Tightening and loosening of all types of bolts and

nuts, used for securing structural items.

BATTERY REMOVAL/INSTALLATION

1. Battery removal

Hold the hadle tightly and push the battery latch

to remove the battery. (Figs. 1 and 2)

CAUTION

Never short-circuit the battery.

2. Battery installation

Insert the battery while observing its polarities (see

Fig. 2).

CHARGING

Before using the impact wrench, charge the battery as

follows.

1. Connect the charger’s power cord to a receptacle.

When the power cord is connected, the charger’s

pilot lamp will blink in red. (At 1-second intervals).

2. Insert the battery into the charger.

Position the battery so that the nameplate faces

toward the caution plate of the charger and push

in the battery until it contacts the bottom plate. (See

Figs. 1 and 3.)

L 6.35

Bit No. L (mm) Code No.

No. 3

45 955230

70 955655

Bit No.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi WR8DH in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi WR8DH Manual

Product: