381177

Hitachi wr14dm Manual

50
Zoom out
Zoom in
Previous page
1/54
Next page
49
English
Tightening time: sec
(Steel plate thickness
t = 10 mm)
Tightening time: sec
(Steel plate thickness
t = 25 mm)
Tightening time: sec
(Steel plate thickness
t = 25 mm)
Tightening torque
Tightening torque
Tightening torque
Fig. 20
Explanation of strength grade:
4 — Yield point of bolt: 320 N/mm
2
{32.6 kgf/mm
2
}
8 — Pulling strength of bolt: 400 N/mm
2
{40.8 kgf/mm
2
}
* The following bolt is used.
Ordinary bolt: Strength grade 4.8
High tensile bolt: Strength grade 12.9
(
Bolt
Nut
Fig. 21
Steel plate thickness t
)
M10 × 30
kgf
•
cm
2000
1500
1000
500
0
0
1
2
3
N
•
m
200
150
100
50
0
M12 × 45
kgf
•
cm
2000
1500
1000
500
0
0
1
2
3
N
•
m
200
150
100
50
0
M14 × 50
kgf
•
cm
2000
1500
1000
500
0
0
1
2
3
N
•
m
200
150
100
50
0
High tension bolt
Ordinary bolt
High tension bolt
Ordinary bolt
Ordinary bolt
High tension bolt
6. Confirm the tightening torque
The following factors contribute to a reduction of
the tightening torque. So confirm the actual
tightening torque needed by screwing up some
bolts before the job with a hand torque wrench.
Factors affecting the tightening torque are as follows.
(1) Voltage
When the discharge margin is reached, voltage
decreases and tightening torque is lowered.
(2) Operating time
The tightening torque increases when the operating
time increases. But the tightening torque does not
increase above a certain value even if the tool is
driven for a long time (See Fig. 20).
(3) Diameter of bolt
The tightening torque differs with the diameter of
the bolt as shown in Fig. 20. Generally a larger
diameter bolt requires larger tightening torque.
(4) Tightening conditions
The tightening torque differs according to the torque
ratio; class, and length of bolts even when bolts
with the same size threads are used. The tightening
torque also differs according to the condition of the
surface of workpiece through which the bolts are
to be tightened. When the bolt and nut turn together,
torque is greatly reduced.
(5) Using optional parts
The tightening torque is reduced a little when an
extension bar, universal joint or a long socketis
used.
(6) Clearance of the socket
A worn or deformed hex or a square-holed socket
will not give an adequate tightness to the fitting
between the nut or anvil, consequently resulting in
loss of tightening torque.
Using an improper socket which does not match
to the bolt will result in an insufficient tightening
torque. Matching socket and bolt sizes are shown
in Table 1 and 2.
Tightening torque
Number of tightenings (PCS)/charging
Fig. 22
M16 × 55 F10T (tighening time 3 sec)
300
250
200
150
100
50
0
0
a
20 40 60 80 100 120 140
3000
2500
2000
1500
1000
500
0
kgf•cm
N•m
When full recharged
When completely discharged
… 50 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi wr14dm at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi wr14dm in the language / languages: English, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hitachi wr14dm

Hitachi wr14dm User Manual - English - 94 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info