79227
10
Zoom out
Zoom in
Previous page
1/52
Next page
9
English
BCL1415 BCL1815 BSL1415 BSL1815X
BCL1430 EBM1830 BSL1415X BSL1830
BSL1430
2. Charger
UC18YRL (Charging voltage: 7.2 V – 18 V)
UC18YRSL (Charging voltage: 7.2 V – 18 V)
UC18YRL UC18YRSL
Optional accessories are subject to change without
notice.
APPLICATIONS
Light-duty vacuuming of dry surfaces
Light-duty vacuuming of damp or wet surfaces
BATTERY REMOVAL/INSTALLATION
1. Battery removal
Hold the handle tightly and push the battery latch
(2 pcs.) to remove the battery (see Figs. 1, 2, 4 and 5).
CAUTION
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see
Figs. 1, 2, 4 and 5).
CHARGING
For rechargeable batteries, please charge in according
to the handling instructions of the charger which you are
using. (Figs. 3 and 6)
PRIOR TO OPERATION
1. Setting up and checking the work environment
Check if the work environment is suitable by
following the precautions.
2. Mounting and dismounting the water guard and
filter
Before using the appliance, check that the filter is
securely mounted. (Figs. 7 and 8)
(1) Mounting
1 Match the outside diameter of the filter to the
inside diameter of the water guard and insert
as far as the filter ring will go. (Fig. 7)
2 Match the shape of the water guard (with the
filter attached) to the shape of the hole in the
dust case and insert as far as it will go (6
points). (Fig. 8)
(2) Dismounting
To dismount the water guard and the filter, follow
the above procedures in reverse.
3. Attaching and removing the suction opening
Insert the suction opening into the suction port of the
appliance as required. (Fig. 10)
HOW TO USE THE CORDLESS CLEANER
CAUTION
To prevent accidents when installing or removing
the rechargeable battery, make sure that the appliance
is switched off.
Make sure that the rechargeable battery is properly
installed.
If not properly installed, the battery may fall out,
causing injury.
1. Switch operation
Flip the switch towards you to start operation and
back to stop operation. (Fig. 11)
2. Vacuuming water
Attach the squeegee nozzle as required. (Figs. 10 and
12)
CAUTION
The maximum line on the dust case indicates the
maximum amount of water that can be vacuumed.
Do not vacuum beyond this line. (Fig. 12)
Empty the water immediately after vacuuming.
Do not carry the appliance with water in the dust
case.
3. Emptying the dust case
CAUTION
To prevent accidents, make sure the power is switched
off and remove the rechargeable battery from the
appliance.
Do not subject the dust case to strong impacts as this
may cause deformation or damage.
Empty the dust case frequently and keep the
appliance, filter, etc. clean. Failure to do so may
reduce vacuuming efficiency or cause malfunction of
the motor or odor.
(1) Press the release button and remove the dust case.
(Fig. 9)
(2) Hold the knob on the water guard (with the filter
attached) to remove it from the dust case. (Fig. 8)
(3) Empty the dust case. (Fig. 13)
(4) Take hold of the knob on the filter and remove the
filter from the water guard. (Fig. 7)
(5) Lightly tap the filter to remove all the dust. (Fig. 14)
(6) Fit the filter to the water guard. Match the outside
diameter of the filter to the inside diameter of the
water guard and insert as far as the filter ring will go.
(Fig. 7)
(7) Match the shape of the water guard (with the filter
attached) to the shape of the hole in the dust case
and insert as far as it will go (6 points). (Fig. 8)
(8) Insert the projecting part of the appliance into the
hole in the dust case and fit the dust case to the
appliance. (Fig. 9)
01Eng_R14DL_WE 3/18/09, 20:349
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi WR 18 DL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi WR 18 DL in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hitachi WR 18 DL

Hitachi WR 18 DL Additional guide - English - 86 pages

Hitachi WR 18 DL User Manual - English - 54 pages

Hitachi WR 18 DL Additional guide - German, Dutch - 86 pages

Hitachi WR 18 DL User Manual - Danish - 54 pages

Hitachi WR 18 DL Additional guide - French, Italian, Portuguese - 86 pages

Hitachi WR 18 DL User Manual - Swedish - 54 pages

Hitachi WR 18 DL Additional guide - Spanish - 86 pages

Hitachi WR 18 DL User Manual - Norwegian, Finnish - 54 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info