571647
14
Zoom out
Zoom in
Previous page
1/72
Next page
English
14
COMPRESSOR
CAUTION
When the maximum, operating pressure of the air
compressor exceeds 23 bar, be sure to provide a
reducing valve between the air compressor and screw
driver. Then, adjust the air pressure within the operating
range of 18 – 23 bar. If the air set is installed, lubrication
is also possible, thus providing additional convenience.
APPLICABLE LUBRICANTS
Type of lubricant Name of lubricant
Recommended oil SHELL TONNA
Motor oil SAE10W, SAE20W
Turbine oil
ISO VG32 – 68
(#90 – #180)
Noise Information
Noise characteristic values in accordance with EN 792-13,
JUNE, 2000:
The typical A-weighted single-event sound power level
Lwa,1s, d = 97.5 dB.
The typical A-weighted single-event emission sound
pressure level at work station
LpA,1s,d = 90.2 dB.
Uncertainty KpA: 2.5 dB (A).
These values are tool-related characteristic values and do
not represent the noise development at the point of use.
Noise development at the point of use will for example
depend on the working environment, the workpiece, the
workpiece support and the number of driving operations, etc.
Depending on the conditions at the workplace and the form
of the workpiece, individual noise attenuation measures
may need to be carried out, such as placing workpieces on
sound-damping supports, preventing workpiece vibration by
means of clamping or covering, adjusting to the minimum air
pressure required for the operation involved,etc.
In special cases it is necessary to wear hearing protection
equipment.
Vibration Information
The typical vibration characteristic value in accordance with
EN 792-13, JUNE, 2000 : 3.4 m/s
2
Uncertainty K = 1.5 m/s
2
This values is a tool-related characteristic value and does not
represent the in uence to the hand-arm-system when using
the tool. An in uence to the hand-arm-system when using
the tool will for example depend on the gripping force, the
contact pressure force, the working direction, the adjustment
of energy supply, the workpiece, the workpiece support.
01Eng_WF4H2_WE.indd 1401Eng_WF4H2_WE.indd 14 2012/04/19 8:53:412012/04/19 8:53:41
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi WF4H2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi WF4H2 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info