571647

Hitachi WF4H2 Manual

9
Zoom out
Zoom in
Previous page
1/72
Next page
English
9
SPECIFICATIONS
Type of power Air motor revolution + Piston reciprocating
Air pressure (Gauge) 18 – 23 bar
Capacity (Applicable screw) Collated screws: 25 – 41 mm
Amount of loadable screws 100 screws (1 coil)
Size 290 mm (L) × 300 mm (H) × 119 mm (W)
Weight 2.1 kg
Screw-feeding method Piston reciprocation
Hose (inside diam.) 5 – 6 mm
STANDARD ACCESSORIES
(1) Eye protector ................................................................1
(2) Oiler .............................................................................. 1
(3) Nose cap ......................................................................1
(4) Bit (No. 2 plus bit) .........................................................1
(5) Bit changing tool ........................................................... 1
OPTIONAL ACCESSORY
For details, consult with your sales outlet.
(1) Stability guide
The stability guide attaches to the bottom of the magazine
to suppress vibration to the body and to stabilize the tool
while driving screws.
(2) Screw coil
Screws come in a variety of shapes and sizes, as
indicated in Table 1; refer to Table 1 to select the screw
most appropriate for your application.
NOTE
○ When driving screws in steel studs, use the genuine
Hitachi steel stud screws in Table 1.
If any other screws are used, they may not drive properly.
○ Using them may cause improper driving (come out,
sticking up) or damage (strip the bit or head of the screw),
so do not use any screws but those specifi ed.
* Come out: Bit fails to engage with the head of the screw,
thus spinning out and failing to screw into the material.
L
d
D
Table 1 Dimensions and shape of collated screws/Application chart
Application
Screw dimesions Gypsum board thickness (mm)
Length L
(mm)
Dia. D
(mm)
Dia. d
(mm)
t9.5 t12.5 t15
t9.5 + t9.5
(double layer)
t12.5 + t12.5
(double layer)
Fastening gypsum board to steel studs
(Steel studs 0.8mm max thickness)
25
8.0
3.5
○○
×× ×
28 ○○○
××
41
×××
○○
Fastening gypsum board to wood studs
25
3.9
○
×× × ×
28 ○○
×× ×
32
×
○○ ○
×
41
×××
○○
○: can be used
Fastening plywood to wood studs
28
7.0 3.7
×: cannot be used
32
41
CAUTION
When selecting screws, always refer to Table 1.
application chart.
If an inappropriate screw is used, the driver will not
perform as designed.
NOTE
The maximum thickness of a steel stud that can be used
with this driver is 0.8 mm.
If you try to drive into a thicker stud or in a place where
studs overlap, it may not drive into them.
(3) Bits
No. 2 Phillips bit (comes with 5)
01Eng_WF4H2_WE.indd 901Eng_WF4H2_WE.indd 9 2012/04/18 14:34:332012/04/18 14:34:33
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi WF4H2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi WF4H2 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info