136056

Hitachi vt fx 850 evps Manual

37
Zoom out
Zoom in
Previous page
1/66
Next page
37
BASIC OPERATIONS
PREPARE RECORDING USING SATELLITE DECODER
Controls VCR's Display
Connect your decoder to L2 (the blue socket
behind the set) as shown in page 7.
Then set the PREPARE REC mode in the menu to
on (√). See page 44.
1
Insert a cassette with safety tab intact. Turn the
VCR to OPERATE off mode, then press VCR/TV
button for more than 3 seconds.
The VCR will display " ".
The VCR is now ready to receive and record signal
from the satellite decoder.
2
Set the timer and channel on the satellite decoder
according to proper procedure of that decoder.
3
At the programmed start-time, the decoder will
activate your VCR to start recording.
Subsequently, the decoder will signal the VCR to
stop recording and to shut-off.
4
To cancel the PREPARE REC setting, you can do
one of the following:
a) Enter the OSD menu and turn PREPARE REC to
off (–).
b) Eject the tape.
c) If recording has not yet started, by pressing
VCR/TV for more than 3 seconds.
d) If recording has already started, by pressing the
OPERATE button, followed by STOP button
within 10 seconds.
Please Note:
Not all satellite receivers support this function.
5
1
4
2
56
3
7 8 9
0
STOP
OPERATE
VCR/TV
"PREPARE - REC" function allows you to easily prepare the VCR to record signals from a satellite/cable
decoder, without setting the timer programme. This avoids the necessity of doing timer programming
twice. (For the decoder and the VCR).
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi vt fx 850 evps at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi vt fx 850 evps in the language / languages: English as an attachment in your email.

The manual is 2,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info