135080
23
Zoom out
Zoom in
Previous page
1/39
Next page
Automatic controlled recording from
a satellite receiver (RECORD LINK)
This function automatically starts recording on the switched-off
video recorder when a video signal is recognised through the
connected scart cable. If your satellite receiver has a
programming function, the recording will start automatically (as
long as the satellite receiver is switched on).
1 Switch on the TV set. If required, select the programme
number for the video recorder.
2 Press
MENU on the remote control. The main menu will
appear.
3 Select line 'SPECIAL SETTINGS' using
P- = or
;P+ and confirm with OK .
SPECIAL SETTINGS
OSD è ON p
CLOCK DISPLAY OFF
RECORD LINK OFF
REPEAT PLAY OFF
DIRECT RECORD OFF
________________________________
EXITpMENU STOREpOK
4 Select line 'RECORD LINK' using P- = or ;P+ .
5 Select function 'ON' with
Q or P .
Switching off 'Record Link'
To switch off the function, select 'OFF'.
6 Confirm with
OK .
7 To end, press
MENU .
8 Insert a cassette.
9 Use a scart cable to connect scart socket
EXT.2 AV. 2
on the video recorder to the corresponding scart socket
on the satellite receiver.
0 Programme the satellite receiver with the required
information (programme number of the TV channel, start
time, end time).
If necessary, please see the operating instructions for
your satellite receiver.
A Switch off the video recorder with
STANDBY m .
The video recorder is now ready to record. The beginning and
end of the recording is controlled via scart socket
EXT.2 AV. 2 .
When this function is switched on, '
x' will appear on the video
recorder display.
'Direct Record'
Can you record the right TV channel in seconds when the
video recorder is switched off? No problem. If recording is
started manually, the switched-off video recorder uses the
current TV channel setted on the TV set.
'Easy Link' is used to transfer the TV channel for video
recorders that are switched on and off.
You will find more information on how to switch 'Direct record'
on or off in the next section 'Direct record'.
How does Direct Record work?
The video recorder compares the TV channel selected on
the TV set with its stored TV channels via the scart cable. If
the same TV channel is found, it switches the video recorder
to the corresponding programme number and starts
recording.
Please do not change the TV channel on the TV set during
the search so as not to affect the process.
1 On the TV set, select the programme number you want
make the recording from.
2 Press
REC/OTR n and A at the same time with the
video recorder switched off.
A 'search symbol' appears in the display (a moving
symbol)
* The video recorder is comparing its saved TV channels
with those of the TV set. Please do not change the TV
channel on the TV set as long as the 'search symbol' (a
moving symbol) is being displayed.
'NOTV' appears in the display
* This TV channel could not be found in the video recorder's
memory.
Check that all TV channels saved on the TV set are
available in the video recorder. If required, save any missing
channels. Please read the section 'Manual TV channel
search'.
3 Stop recording with
h .
20
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi vt fx 140 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi vt fx 140 in the language / languages: English as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hitachi vt fx 140

Hitachi vt fx 140 User Manual - German - 37 pages

Hitachi vt fx 140 User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info