571427

Hitachi UR18DSL2 Manual

10
Zoom out
Zoom in
Previous page
1/60
Next page
10
English
USING THE TIMER FUNCTION
○ The radio turns on/off at the preset time
○ Use the radio as an alarm clock
● Sleep Timer
Setting the sleep timer turns the radio off after the set time
has elapsed.
1. Pressing the sleep timer / clock button while the
power is turned on displays the
SLEEP
indicator.
The time (minutes) indicator changes in order of
[90→80→70→...→10→OFF] in 10-minute units each time
the button is pressed.
2. Press the button repeatedly until the desired time is
displayed.
3. The radio turns off when the set time has elapsed.
4. To cancel the timer, press the sleep timer / clock button
until the indicator is set to OFF.
The
SLEEP
indicator goes off and the sleep timer is
cancelled.
To check the remaining time
The
SLEEP
indicator is displayed when the sleep timer
has been set.
Press the sleep timer / clock button to check the remaining
time on the timer.
● Buzzer Alarm / Radio Alarm
NOTE
○ The volume of the buzzer alarm cannot be adjusted.
○ If the rechargeable battery is running low, the radio alarm
timer may not work.
Charge the battery before setting the timer or use the AC
adapter.
○ The radio alarm turns on in the station and at the volume
selected before the timer was set. Set the volume and
time to avoid creating a disturbance when the radio turns
on.
When the alarm time is set and the buzzer alarm is selected,
the buzzer sounds at the preset time.
When the radio alarm is selected, the radio turns on in the
selected radio station at the preset time.
1. Set the time with the radio turned off .
2. Press and hold the FM mode / alarm button for more than
2 seconds to switch to alarm mode.
The
ALARM
indicator is displayed.
3. The “hour” indicator blinks. Turn the select dial or press
the search button to select the desired “hour”.
Press the FM mode / alarm button to set the “hour”. The
“minutes” indicator blinks. Turn the select dial or press
the search button to select the desired “minutes”.
4. Press the FM mode / alarm button to save the set time.
The
ALARM
indicator goes off .
5. The display changes in order of [buzzer alarm→radio
alarm→no display] each time the FM mode / alarm button
is pressed.
6. The power turns on and the buzzer sounds or the radio
plays when the preset time is reached.
Buzzer Alarm
To turn off the buzzer alarm, press the FM mode / alarm
button. If it is not turned off , the buzzer will continue to sound
for 1 minute and then stop.
Radio Alarm
To turn off the radio, press the power button. If it is not turned
off , the radio will continue to play for 30 minutes.
To check the alarm
To check the time set on the alarm, press the band selector
button with the power turned off .
LISTENING TO THE PORTABLE MUSIC PLAYER
● Connecting an External Device
You can use the radio to listen to a portable music player as
MP3 player, smartphone, etc.
CAUTION
○ Reduce the volume before switching on the power.
Sudden loud volume output may result in damage to the
speakers or cause hearing loss.
○ Do not store external devices in the storage case
in environments subject to direct sunlight or high
temperatures. Failure to observe this may result in
damage to the equipment.
○ Check the inside of the storage case for sand and
other foreign matter before storing external devices in
it, and clean out any foreign matter that exists. Failure
to observe this may result in the equipment becoming
scratched or otherwise damaged.
NOTE
Certain models of smartphones will not emit call tones
from their speakers when connected to the radio.
Check whether your smartphone emits call tones via the
speakers prior to use.
1. With the radio and the external device both turned off ,
connect the audio cord (ø3.5 mm, available at an electric
store) of the external device to the AUX input terminal
on the inside of the external device storage case on the
radio. (Fig. 8)
NOTE
There are two types of connection cable available:
straight cables and L-shaped cables. Use L-shaped
cables when connecting and storing large-scale external
devices. (Fig. 9)
2. Turn on the radio and press the band select button to
display [AUX].
NOTE
The display changes in the order of [FM→AM→AUX→FM]
each time the band select button is pressed.
3. Turn on the external device to start listening.
4. Adjust the volume.
NOTE
Volume may not increase if the peripheral equipment’s
volume output level is low.
5. Store portable audio players inside the external device
storage box.
(1) Fix the belt in place. (Fig. 10)
(2) Protect it with the cushioning sheet. (Fig. 11)
There are cases in which the cushioning sheet will
not be able to protect external devices depending on
their thickness.
In this event, fi x them in place with the belt as
explained in (1).
6. To disconnect the external device, turn off the device and
the radio before removing the audio cord.
OTHER FUNCTIONS
● Using Headphones
You can use headphones or earphones purchased from an
electric store to listen to the radio.
CAUTION
Be sure to turn the volume down before connecting the
headphones or earphones.
Failure to do so may result in sudden loud noise and
cause hearing impairment.
01Eng_UR18DSL2_WE.indd 1001Eng_UR18DSL2_WE.indd 10 2013/06/20 16:27:502013/06/20 16:27:50
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi UR18DSL2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi UR18DSL2 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info