Manual Hitachi RP35YE (page 10 of 68) (English, German, Dutch, French, Italian, Portuguese, Spanish)

570714

Zoom out

Zoom in

1/68

English

SAFETY PRECAUTIONS FOR THE DUST

EXTRACTOR

⅜ In order to prevent accidents, such as fires, electric

shock, and injuries, be sure to follow the “Safety

Precautions” stated below.

⅜ Before use, read all of the “Safety Precautions” and

use the appliance correctly according to the

instructions.

⅜ Be sure to keep this instructions manual in the place

where it can be consulted by the user at any time.

WARNING

1. Keep the workplace clean. Littered place or

workbench may cause accidents.

2. Pay attention to the situation around the workplace

as well. Make the workplace bright enough. Do not

use the appliance in places with inflammable liquid

or gas.

3. Use the power supply with the voltage and frequency

displayed on the nameplate. Use of the power supply

with other voltage or frequency will cause fires,

electric shock, or failures.

4. Keep children away. Do not let other persons than

the operator touch the dust extractor or the cord.

Keep persons other than the operator away from

the workplace.

5. Use the dust extractor suitable for the work. Use

the appliance only for the specified applications.

6. Do not handle the cord roughly. Do not carry the

dust extractor holding the cord by hand or do not

extract the cord from the power receptacle by pulling

it. Keep the cord away from heat, oil, or angular

places. Moreover, do not put a heavy thing on it

or do not get it sandwiched.

7. The dust extractor should be maintained carefully.

Replacement of accessories should follow the

instructions manual. Check the cord periodically.

When it is damaged, please request repair from

your local retailer or the authorized servicing agent.

If an extension cord is used, check it periodically,

and when damaged, replace it.

8. In the following cases, switch off the dust extractor

and turn OFF the main power supply:

The dust extractor is not used or it is sent for repair.

Accessories, such as a hose and a filter, are replaced.

Danger is expected.

9. Avoid sudden starting. Do not carry the appliance

which is connected to the power supply with your

finger placed on the switch. Confirm that the switch

is off before putting the plug in the power receptacle.

10. Do the work with enough care. When you use the

dust extractor, pay attention to the handling method,

how to do the work, the surrounding situation, etc.

and perform the operation in a cautious manner.

When you do the work at a distance from the dust

extractor, pay attention to the operation condition

of the dust extractor. (abnormal sound, dust blow

off, emitting smoke, etc.) Exercise common sense.

Do not use the appliance when you are tired.

11. Check for any damaged part.

⅜ Before use, check for any damages in the protective

cover or other parts and confirm whether the

appliance operates normally and performs specified

functions.

⅜ Check for any abnormalities in all places that may

affect the operation, the position adjustment and

clamping state of movable portions, damaged parts

or attachment state.

⅜ Replacement and repair of damaged protective cover

and other parts should follow the provisions of the

handling instructions. If there are no such provisions

in the manual, please request repair from your local

retailer or authorized servicing agent.

⅜ If the switch fails, please request repair from your

local retailer or authorized servicing agent. Avoid

using the dust extractor which cannot be started

or stopped by the switch.

12. Contact the specialty store for repair of the dust

extractor.

⅜ Since this dust extractor conforms to the

corresponding safety standard, do not modify it.

⅜ Be sure to request repair from your local retailer

or authorized servicing agent. Self-repair may cause

accidents or injuries.

PRECAUTIONS FOR USE OF THE DUST

EXTRACTOR FOR ELECTRIC TOOLS

The precautions common to the dust extractors have

been described. For the dust extractors for electric tools,

follow further precautions described below:

WARNING

1. The power consumption of an electric tool that can

be connected to the interlocking outlet is 2300 W

during operation, respectively. If an electric tool

with power consumption exceeding the above is

used in connection with the interlocking outlet,

overcurrent will cause failures of the interlocking

circuit or the plug or injuries.

2. Use the power receptacle with its rating 16 A or

more and in isolation. If it is used together with

other instruments, fires may be caused by abnormal

heat generation.

3. Prevent the appliance from sucking in the following:

⅜ Generated spark during metal grinding or cutting.

⅜ High temperature things, such as lighted cigarette.

⅜ Inflammable substances (gasoline, thinner, benzine,

kerosene, paint, etc.), explosive substances

(nitroglycerine, etc.), combustible substances

(aluminum, zinc, magnesium, titanium, red

phosphorus, yellow phosphorus, celluloid, etc.)

⅜ Sharp things, such as nail and razor.

⅜ Wood chip, metal, stone, string, etc.

⅜ Solidification materials, such as cement powder

and toner, and conductive fine dusts, such as metal

powder and carbon powder.

⅜ Foaming liquids, such as oil, boiling water, chemical

fluid, and detergent. Liquids, such as water and oil.

May cause fires or injuries.

4. Set the filter correctly before use. Do not use the

appliance without the filter or with it set in a wrong

position, or do not use a torn filter. May cause

failures, such as motor burnout.

5. Do not put water or oil on the appliance or plug

or interlocking outlet. Since this appliance is not

waterproof, electric shock or failures may be caused.

6. Do not use the appliance with its suction opening,

air inlet or exhaust opening obstructed. The

temperature of the motor may rise abnormally,

01Eng_RP35YB_WE 3/5/09, 13:509

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi RP35YE in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi RP35YE Manual

Product: