467122
22
Zoom out
Zoom in
Previous page
1/52
Next page
– 22 –
RAR-3R5
MOLD MONITOR OPERATION
The air conditioner detects indoor temperature and humidity. Once the temperature and humidity reaches to a
level conductive to mold growth, the dehumidifying and Stainless Plasma Air Purifying operations automatically
start.
Press the
(FUNCTION SELECTOR) button again until (MOLD
MONITOR) blinks.
While (MOLD MONITOR) is blinking, point the remote controller towards
the unit and press the (ON/OFF) button.
A short beep sounds and (MOLD MONITOR) indicator turns off on the
remote controller.
The (MONITOR) indicator on the indoor unit turns off.
CANCEL
2
Press the (FUNCTION SELECTOR) button until
(MOLD MONITOR) blinks.
While (MOLD MONITOR) is blinking, point the remote controller towards the
unit and press the (ON/OFF) button.
Preset the Mold Monitor operation.
During the Mold Monitor operation, (ON/OFF), (MONITOR) and
(MIST/AIR PURIFYING) indicators on the indoor unit turns on.
1
Mold Monitoring operation is a preset function. Even if Mold Monitoring mode is preset, the actual operation
will be performed only when the detected temperature and humidity has reached the level conducive to mold
growth.
The setting of Mold Monitoring mode is valid for 2 weeks from the last remote control operation.
(If any remote control operation is performed while (MOLD MONITOR) is set, the preset Mold Monitoring
mode is valid for 2 weeks from such remote control operation.)
Once the above mentioned 2 weeks have elapsed, the (MONITOR) indicator on the indoor unit turns
off.
(However, (MOLD MONITOR) indication on the remote controller remains on. If the (MONITOR)
indicator on the indoor unit is off, please reset or cancel the Mold Monitoring mode.)
When Mold Monitoring mode is set, the fan operation is performed for approximately 3 minutes once every
approximately 20 minutes and the room temperature and humidity are detected.
(The movable panel and horizontal air deflector remain closed when temperature and humidity are
detected.)
In the first cycle of Mold Monitoring operation, dehumidifying operation is performed for 4 hours consecutively
if the detected temperature and humidity are 10°C and more and 70% and more, respectively. From the
second cycle onwards, dehumidifying operation is performed if the detected temperature and humidity reach
the above mentioned level and will stop once the humidity has gone down.
For the duration of 20 minutes after Mold Monitoring operation temporarily stops, the Mold Monitoring operation
is not performed immediately even if Mold Monitoring mode remains set and the humidity exceeds 70%.
There is no function to remove mold that has grown.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi RAS-25SX8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi RAS-25SX8 in the language / languages: English as an attachment in your email.

The manual is 5,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info