467121
33
Zoom out
Zoom in
Previous page
1/52
Next page
– 33 –
ENGLISH
DEUTSCHFRANÇAISITALIANOSPANISHPORTUGUÊS
∂ÏÏËÓÈο
РУССКИЙ
RAR-3R5
(Troubleshooting, page 45)
The cleaning unit makes one cycle of back and forth movement to sweep the dust on the micro mesh
stainless filter and the dust catcher puts the collected dust into the dust box.
One cycle of filter cleaning operation will take approximately 7 minutes.
(CLEAN) indicator lit during filter cleaning operation.
Movable panel and horizontal air deflectors remain closed when fan operation starts.
Conditions under which automatic filter cleaning is performed
When the air conditioner operates for more than 15 minutes and stop, automatic filter cleaning is performed
in one of the following conditions.
(1) Accumulated operating hours of the air conditioner have exceeded 10 hours.
(2) Air conditioner is not operated for more than one week.
(To clean the dust which is naturally deposited on the top filter.)
CAUTION: The accumulated operating hours will not be reset if the automatic filter cleaning operation is
stopped before its completion.
If the air conditioner is in operation continuously, the operation is stopped and automatic filter cleaning
operation is performed once 24 hours have elapsed.
After the completion of automatic filter cleaning, the operation will return to the operation mode which had
been set prior to the automatic filter cleaning.
n Automatic filter cleaning is not performed if the air conditioner operation is stopped by Sleep Timer or Off
Timer function.
If you use Sleep Timer or Off Timer every time, manual filter cleaning should be executed approximately
once every 2~3 days. (Page 34)
However, if no manual filter cleaning is performed, automatic filter cleaning will be performed approximately
once a week after the air conditioner operation is stopped by Sleep Timer or Off Timer function to protect
the device.
About the noise during filter cleaning
A whirring motor noise is generated due to driving of the cleaning unit.
A clapping noise is generated when the dust catcher collects the dust
swept by the cleaning unit.
A clapping noise is generated when the dust catcher is turned over by the
cleaning unit.
A sweeping sound is generated when the cleaning unit sweeps the dust.
Press the (START/STOP) button twice.
Press (START/STOP) button on the remote controller twice to
stop the process of filter cleaning operation.
STOP
The air blown from the air conditioner will become softer when the air conditioner is operated immediately
after filter cleaning operation.
Remove and clean the micro mesh stainless filter in the case where filter cleaning operation is prohibited.
(Page 37)
Only during the filter cleaning operation that was started by pressing the (MANUAL CLEAN) button on
the remote controller, the filter cleaning operation stops if the (MANUAL CLEAN) button on the remote
controller is pressed one more time.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi RAC-18SX8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi RAC-18SX8 in the language / languages: English as an attachment in your email.

The manual is 5,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info