214754
71
Zoom out
Zoom in
Previous page
1/81
Next page
61
ENGLISH
Troubleshooting
Troubleshooting
Related messages
When the projector is turned on, the following messages may be displayed. When
any such message is displayed on the screen, please follow the instructions
described below. If the same message is displayed after trying the solutions
below, or if a message other than the following appears, please contact your
dealer or service company.
Although these messages will be automatically disappear after several minutes,
they will reappear every time the power is turned on.
Message Description
There is no input signal.
Please confirm the input signal connection, and the status
of the signal source.
The horizontal or vertical wavelength of the input signal
is out of the response parameter range of this projector.
Please confirm the specs for the projector and the signal
source specs.
CHECK THE AIR FLOW
The internal temperature is high.
Please turn the power off, and allow the projector to cool
down for at least 20 minutes. After confirming the following
items, please turn the power on again.
• Is there blockage of the air passage aperture?
• Is the air filter dirty?
• Does the peripheral temperature exceed 35°C?
If the same indication is displayed after trying the solutions
above, please set the FAN SPEED of the SERVICE item in
the OPTION menu to HIGH (54).
REMINDER
*** HRS PASSED AFTER THE
LAST FILTER CHECK.
FILTER MAINTENANCE IS ESSENTIAL
TO REMOVE WARNING MESSAGE,
RESET FILTER TIMER.
SEE MANUAL FURTHER INFO
A note of precaution when cleaning the air filter.
Please immediately turn the power off, and clean or change
the air filter, according to the directions in “Air filter” (
58).
After you have cleaned or changed the air filter, please be
sure to reset the FILTER TIME (
53).
NO INPUT IS DETECTED
ON ***
SYNC IS OUT OF RANGE
ON *** fH *****kHz fV *****Hz
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi pj tx300w at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi pj tx300w in the language / languages: English as an attachment in your email.

The manual is 8,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info