214485
71
Zoom out
Zoom in
Previous page
1/82
Next page
60
Maintenance
Inside of the projector
In order to ensure the safety of your projector, please have it cleaned and
inspected by your dealer about once a year.
1.
Turn the projector off, and unplug the power cord. Allow the projector to
sufficiently cool down.
2.
After making sure that the projector has adequately cooled, lightly wipe the
lens with a commercially available lens-cleaning wipe. Do not touch the lens
directly with your hand.
Lens
In order to ensure the safety of your projector, please have it cleaned and
inspected by your dealer about once a year.
If the lens is flawed, dirty or fogged, it could cause deterioration of display quality.
Take special care of the lens and handle it carefully.
1.
Turn the projector off, and unplug the power cord. Allow the projector to
sufficiently cool down.
2.
After making sure that the projector has adequately cooled, lightly wipe with
gauze or a soft cloth. If the projector is extremely dirty, dip a soft cloth in
water or a neutral cleaner diluted in water, wring well, and wipe the projector
lightly. Then, wipe lightly with a soft, dry cloth.
Cabinet and Remote control
Incorrect care could cause discoloration, peeling, etc.
► Do not maintain the projector during or immediately after use.
Handling while the projector is hot could cause burn and/or projector malfunction.
Before maintaining, make sure that the power switch is off, that the power cord is
unplugged, and that the projector is adequately cool.
► Never try to maintain the inside of the projector yourself. Doing is so
dangerous.
► Do not get the projector wet or insert liquids into the projector. It could result
in fire, electric shock, and/or projector malfunction.
● Do not place anything containing liquid near the projector.
● Do not use aerosols or sprays on the projector.
WARNING
► Properly maintain the projector according to the following.
Incorrect care could cause injury, and/or discoloration, peeling, etc.
• Do not use cleaners or chemicals other than those specified in this manual.
• Do not polish or wipe the projector with hard objects.
CAUTION
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi pj tx200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi pj tx200 in the language / languages: English as an attachment in your email.

The manual is 8,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info