51363
65
Zoom out
Zoom in
Previous page
1/71
Next page
64
TROUBLESHOOTING (continued)
Symptom and Check List (continued)
Symptoms Check list Page
• No picture
The Indicating lamp ĺ Off
Check if the Power Cord is plugged into the socket fi rmly.
Check if the Main Power is ON.
20
,
21
• No picture
The Indicating lamp ĺ Pulsing blue
It means that the unit is in “Power Save
mode”.
Check if all the cables of the external equipments are connected
correctly and fi rmly.
Check if the power of the external equipments is ON.
Check if the TV/AV mode has been selected correctly.
Refer to “Power Save mode” and “When following messages appears
on the screen”.
61
• No picture
The indicating lamp ĺ Blue
Check if the signal cable is connected correctly and fi rmly.
Adjust the level of Brightness and Contrast lower.
15
~
18
The top of the unit and surface of the
panel heat up.
It may happen when you use the unit for a long time. Turn off the Main
Power of the unit for a whilst. Please note that this is not malfunction.
66
,
68
The image contrast reduces whilst
displaying still images.
If still images are left on the screen for more than 2.5 minutes, protection
function will work automatically so that contrast reduces to minimize
image retention on plasma display panel. Please note that this is not
malfunction but it helps to minimize image retention.
The original contrast will restore after moving images are displayed for
about 6 minutes. Original contrast can be restored quickly by turning the
power On/Off with remote control or power switch on the unit.
When the VCR is in special playback
features (Fast Forward or Rewind), the
screen gets dark and cannot see the
image at all.
It could happen when the VCR is connected to Component output, such
as 480i. This is not malfunction.
• Try Composite output or S-video output and check the picture again.
Screen display size cannot be switched
correctly.
The display size is fi xed at “FULL” when the receiving signals are
720p/60Hz or 720p/50Hz.
50
,
51
Time information is incorrect. Adjust time by using “Time Offset” of Function Menu.
35
Image cannot be displayed from HDMI 1
or 2.
Check if the cables are connected correctly.
Check the output format of the equipments.
(Please refer to “Signal Input” and “Recommended Signal List”.)
66
~
68
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi P42TP01Uom at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi P42TP01Uom in the language / languages: English as an attachment in your email.

The manual is 3,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hitachi P42TP01Uom

Hitachi P42TP01Uom User Manual - German - 71 pages

Hitachi P42TP01Uom User Manual - Dutch - 73 pages

Hitachi P42TP01Uom User Manual - Danish - 71 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info