67513
64
Zoom out
Zoom in
Previous page
1/71
Next page
63
ENGLISH
TROUBLESHOOTING
Before calling service technician, check the following tables fi rst. If the problem is not be solved with the suggested
procedures, contact your local dealer. For your safety, NEVER try to repair the product by yourself.
When Following Messages Appear on the Screen
Message Condition / Action Page
Power saving
This indicates it is in Power Save mode.
The indicating lamp pulses Blue or lights Red.
21
,
30
,
61
No sync. signal
The unit cannot detect any signals from any input terminals.
• Check if the cable is connected correctly and fi rmly.
• Check if the power of any external equipment is ON.
• Check if the input selection matches the connection terminal.
15
~
18
Not available This shows when the selected operation is not available.
Please push Return button.
This message appears when you select other than button whilst Screen Wipe is ON.
Press button when this message appears.
30
Check Aerial Check the connection status when this message appears. (in TV mode)
14
Weak signal or channel not
available. Check aerial.
• Check aerial lead if it is disconnected / damaged / misaligned.
• Check with your dealer if it is out of signal area or not. (in DTT mode)
Encrypted Channel • Check if the common interface module inserted correctly. (in DTT mode)
17
,
36
Symptom and Check List
Symptoms Check list Page
No picture - no sound
Check the Indicating lamp status.
Check the connection of the Power Cord and/or other
cables.
Check if the Main Power of the unit or external equipments is ON.
• Check if the TV mode is selected.
Check if the TV is in “Standby mode” or “Power Save mode”.
Adjust the values in “Picture menu” and “Audio menu”.
14
~
21
25
,
61
Snowy picture-poor sound
• Check the aerial connection and direction.
• The TV station may have broadcast diffi culties.
Try another channel.
14
Multiple images-normal sound
• Check the aerial connection and direction.
• Fine tuning the TV.
• Check the connection of the external equipments.
The TV station may have broadcast diffi culties. Try another channel.
14
~
18
28
Intermittent interference
• Check if the source of interference is shielded well.
• Remove those kinds of electrical devices away from the TV.
Normal picture, but no sound
• Check the volume level.
• Check if the
button has been pressed or not.
• Make sure that the headphone is NOT connected.
• Check the connection of the external equipments.
24
No picture - normal sound
• Check the value level of “Brightness” and “Contrast” in
“Picture Menu”.
• Check if Radio broadcasting channels are received. (DTT
mode only)
32
The remote control does not work.
Check if the batteries are installed correctly.
The batteries might be exhausted. Replace them with new ones.
Remove all the obstructions in front of the sensor window on the unit.
• Check if you select the correct function by Function Select
(TV/DTT, DVD and SAT) buttons on the remote control.
• Check if the buttons of the control panel can work.
11
,
12
Normal picture but no colour-normal
sound
• Check the connection of the external equipments.
• Check the “Colour System” in “Initial Setup” menu.
• Check the “Inputs Outputs” in “Initial Setup” menu.
15
~
18
27
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi P42T01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi P42T01 in the language / languages: English as an attachment in your email.

The manual is 3,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hitachi P42T01

Hitachi P42T01 User Manual - German - 71 pages

Hitachi P42T01 User Manual - Dutch - 73 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info