67593
22
Zoom out
Zoom in
Previous page
1/37
Next page
21
ENGLISH
BASIC OPERATION (continued)
Conceal stored channels
Picture format
Press , then press ϳ or ϴ to select desired picture format, then press ENTER.
AUTO
Automatically selects the aspect ratio (see note below).
NOTE
In case a screen switches with AUTO operation, the screen may become black for a moment according to
the conditions of a weak-electric-field and an input signal, but it is not a failure.
4:3
It shows a 4:3-picture in original size with grey bands on left and right side.
FULL
Stretches the left and right hand sides of a 4:3 picture horizontally to fill the screen, while leaving
the centre of the picture unstretched.
NOTE
In this mode the picture is geometrically distorted on the left and the right sides of the screen.
PANORAMIC
This mode is used with 16:9 signals from a Digital decoder, a DVD player or other external
source. This uniformly stretches a 4:3 image horizontally to fill the screen (For example, a 16:9
image is often stored “anamorphically” on a DVD, where the 16:9 image is stored as a horizontally
compressed 4:3 image - this mode restores the image to its correct 16:9 proportions).
ZOOM
This mode is used to zoom-in on (expand) 4:3 “letterbox” format pictures (with grey bars at the top
and bottom) so that they fill more of the screen.
NOTE
In the ZOOM mode, part of the picture may be slightly cut off due to the expansion. However, it is possible to scroll the picture up or
down to view the top or bottom part of the picture
26
.
14:9
This enlarges a 4:3 picture to the 14:9 format.
NOTE
When the Picture format is set to AUTO, the aspect ratio will automatically change according to the Wide Screen Switching (WSS)
signal, if it is available. This may be either transmitted by the broadcasting TV channel, or via a recording from a VCR etc. Any WSS
signal received will only be effective in the AUTO mode - however, some DVD players / Digital Decoders etc. will automatically
switch the aspect ratio via the SCART input (Pin 8 switching), even if AUTO is not selected. In any case if you want to change to a
different aspect ratio to the one selected automatically, you can change it by pressing
.
In PC mode, the Picture format is available only for 16:9 or 4:3 format. (In “WXGA INPUT” and “WVGA INPUT” mode, the Picture
format is not available.)
In HDMI or COMPONENT mode of scanning rate: 720p and 1080i, the Picture format is available only for FULL1, FULL2 and
ZOOM format.
SUBTITLE SUBTITLE
SUBTITLE SUBTITLE
You can conceal certain channels so that when you use the P+ or buttons they are skipped.
In this case these channels are not deleted - they can be accessed at any time using the 10 Number Buttons.
1
Select the channel to be concealed (i.e. CH29).
Press SKIP. The programme number flashes.
2
Select the next channel to be concealed.
Press SKIP. The programme number flashes.
You can conceal as many channels as you like.
Cancel concealment of channels
Select the concealed channels with the 10 Number Buttons.
The programme number flashes.
Press SKIP. The programme number no longer flashes.
This channel is no longer concealed.
(FULL)
(PANORAMIC)
(ZOOM)
(14:9)
[0-5 ] : SELECT
PICTURE SIZE
0.AUTO
1.4:3
2.FULL
3.PANORAMIC
4.ZOOM
5.14:9
:SETENTER
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi P42A01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi P42A01 in the language / languages: English as an attachment in your email.

The manual is 2,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hitachi P42A01

Hitachi P42A01 User Manual - German - 36 pages

Hitachi P42A01 User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info