Manual Hitachi NV100H (page 9 of 60) (English, German, Dutch, French, Italian, Portuguese, Spanish)

568901

Zoom out

Zoom in

1/60

English

NAIL SELECTION

Wire collated nails can be driven with this tool.

Choose a suitable nail from Fig. Nails which are not

shown in Fig. can not be driven with this tool. Nails are

linked and rolled.

Dimensions of nails

STANDARD ACCESSORIES

(1) Eye protector .............................................................. 1

(2) Oiler ............................................................................. 1

(3) Nose cap ..................................................................... 1

OPTIONAL ACCESSORY

⅜ Single Sequential Actuation Mechanism Kit

(Sequential Fire Parts Set, Single Shot Parts)

With the sequential fire parts,the nail is driven only

by squeezing the trigger after pushing down the

push lever.

By installing these parts, driving nails into improper

positions and unexpected firing of nails caused by

accidental operation of the push lever can be

prevented.

its air plug, and the air socket used to connect the

compressor and air hose are exclusively designed

for use with high-pressure parts, and cannot be

connected to standard-pressure parts. Do not

modify the air plug and air socket. Using other

parts may result in an accident.

28. Use a compressor and an air hose intended for

high-pressure nailers.

This nailer is designed to operate with air pressure

higher than that for general nailers. Therefore, use

a compressor and an air hose intended for use with

a high-pressure nailer. The main unit of this nailer,

SPECIFICATIONS

Type of power Piston reciprocating

Air pressure (Gauge) 12 – 23 bar (170 – 320 psi.)

Applicable nails ref. Fig.

Amount of loadable nails 150 – 300 nails (1 coil)

Size 280 mm (L) × 338 mm (H) × 132 mm (W) (11” × 13-5/16” × 5-3/16”)

Weight 2.7 kg (5.9 lbs)

Nail-feeding method Piston reciprocation

Hose (inside diam.) 5 – 6 mm (13/64” – 15/64”)

APPLICATIONS

⅜ Construction wooden works such as floor and wall

framing, roof decking and subflooring.

⅜ Mobile and modular home construction.

⅜ Making wooden boxes, palletes, and drums.

⅜ Packing operations in manufacturing plants, and other

types of packing and crating work in general.

PREPARATION PRIOR TO OPERATION

1. Prepare the hose

Use an air hose designed for high-pressure operation.

Be sure to use the hose provided with minimum 5

mm (13/64”) inside diameter.

NOTE:

The air supply hoses must have a minimum working

pressure rating of 29.4 bar (420 psi) .

2. Check on safety

CAUTION

⅜ Unauthorized persons (including children) must be

kept away from the equipment.

⅜ Wear eye protector.

⅜ Check the retaining screws which fix the exhaust

cover, etc. for tightness.

Check the nailer for air leaks and defective or rusty

parts.

⅜ Check whether or not the push lever works correctly.

Also check whether or not any dirt has adhered to the

moving parts of the push lever.

⅜ Recheck on operational safety.

BEFORE USE

1. Check the air pressure

CAUTION

Use a compressor designed for high-pressure

operation.

The air pressure must be constantly maintained at

12 – 23 bar (170 – 320 psi.).

Adjust the air pressure between 12 to 23 bar (170 –

320 psi.) according to the diameters and length of

nails and hardness of the wood being nailed. Pay

special attention to the output pressure, capacity, and

piping on the air compressor, so that air pressure

Wire-collatd coil nails

Min. Max.

6 mm 7.9 mm

(.236”) (.311”)

2.5 mm

(.099”)

100 mm (4”)

3.8 mm

(.148”)

50 mm (2”)

01Eng_NV100H_WE 3/27/12, 14:059

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi NV100H in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi NV100H Manual

Product: