568896
39
Zoom out
Zoom in
Previous page
1/54
Next page
38
Español
abandonar el lugar de trabajo, mover la herramienta
a otro lugar o después de usarla. Es muy peligroso
dejar clavos en la herramienta puesto que podrían
ser disparos por accidente.
21. Cuando extraiga un clavo que se ha atascado,
asegúrese de desconectar primero la manguera y de
liberar el aire comprimido.
Cuando extraiga un clavo que se ha atascado, primero
asegúrese de desconectar la manguera y liberar el
aire comprimido que hay dentro de la misma.
El disparo accidental de un clavo puede resultar muy
peligroso.
22. En el cuerpo de la herramienta no debe emplearse
una clavija hembra (enchufe de aire).
Si instala una clavija hembra en el cuerpo de la
herramienta, a veces el aire comprimido no podrá
ser dirigido cuando la manguera está desconectada,
por lo tanto evítelo.
La herramienta y la manguera de suministro de aire
deben tener un acoplamiento de manguera para
extraer toda la presión de la herramienta al
desconectar la junta del acoplamiento.
23. Desconecte la manguera cuando coloque o retire la
tapa de nariz.
Asegúrese de desconectar previamente la manguera
antes de colocar o de retirar la tapa de nariz opcional
en o del extremo de la palanca de empuje. Puede
resultar sumamente peligroso que el clavo se dispare
accidentalmente.
SELECCIÓN DE LOS CLAVOS
ESPECIFICACIONES
Tipo motorizado Pistón alternativo
Presión de aire (medidor)
4,9 – 8,3
barias
Clavos aplicables Consultar la Fig.
Cantidad de clavos a cargar
100
clavos
(2 tira)
Tamaño 295 mm (L) × 285 mm (Al) × 71 mm (An)
Peso 1,7 kg
Método de alimentación de los clavos Tipo resorte
Manguera (diámetro interior) 6 mm
Con este martillo neumático solamente podrán utilizarse los clavos indicados en la tabla siguiente.
Max.
Min.
Dimensiones de los clavos
ACCESORIOS ESTÁNDAR
(1) Caja .............................................................................. 1
(2) Llave de barra hexagonal para tornillo M6 .............. 1
(3) Llave de barra hexagonal para tornillo M5 .............. 1
(4) Llave de barra hexagonal para tornillo M4 .............. 1
(5) Protector ocular ......................................................... 1
(6) Engrasador.................................................................. 1
(7) Tapa para el morro (montada en la herramienta) ... 1
APLICACIONES
El clavado como proceso de terminación en áreas
periféricas de puertas, ventanas y también para el
rebordeado.
Reforzar el fondo de cajones. Construcción de
distintos tipos de cajas y armarios.
Clavos de acabado de
calibre 16
65 mm
2,8 mm
38 mm
1,3 mm
1,65 mm1,4 mm
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi NT65M2S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi NT65M2S in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info