Manual Hitachi NT65GB (page 13 of 104) (English, German, Dutch, French, Italian, Portuguese, Spanish)

568894

Zoom out

Zoom in

1/104

English

STANDARD ACCESSORIES

(1) Eye protector .............................................................. 1

(2) Charger ........................................................................ 1

(3) Case ............................................................................. 1

(4) Hexagonal bar wrench for M4 screw ........................ 1

(5) Hexagonal bar wrench for M5 screw ........................ 1

(6) Oiler ............................................................................. 1

(7) Battery ......................................................................... 2

(8) Charger connecting plug (DC) ................................... 1

(9) AC Adapter .................................................................. 1

(

) Nose cap (mounted on tool)

(NT65GS / NT65GB) ................................................... 1

(NT50GS) ..................................................................... 2

OPTIONAL ACCESSORIES ......... sold separately

⅜ Fuel Cell .......................................... Code No. 753-700

⅜ Gas Finish Nailer Lubricant

250 cc (8 oz.) oil feeder ............... (Code No. 885-246)

APPLICATIONS

⅜ Nailing as finishing process for areas around the

doors, windows as well as edgings.

⅜ Securing the bottom of drawers. Making various cases

and cabinets.

⅜ Cabinet and picture frame assembly, furniture trim.

⅜ On-site and mobile home trim and molding.

CHARGING

Before using the power tool, charge the battery as follows.

1. Insert the charger connecting plug into the

connecting socket of the charger (Fig. 1)

2. Connect to the power source

When using the AC adapter

Plug the AC adapter into the power outlet.

CAUTION

Do not use the electrical cord if damaged. Have it

repaired immediately.

When using the cigarette lighter connecting plug

⅜ Secure the battery charger in place in the car.

Use the strap supplied with the battery charger to

fasten the battery charger in place and prevent it from

moving inadvertently. (See Fig. 2)

CAUTION

Do not place the battery charger or battery under

the driver’s seat. Secure the battery charger in

place to prevent it from moving inadvertently as

this may lead to an accident. (See Fig. 2)

⅜ Insert the cigarette lighter connecting plug into the

cigarette lighter socket.

If the plug is loose and falls out of the cigarette lighter

socket, repair the socket. As the socket may be faulty,

you are recommended to contact your local car dealer.

Continued use of the socket may result in an accident

due to overheating.

3. Insert the battery in the charger

Position the battery so that the nameplate faces

toward the nameplate of the charger and press in the

battery until it comes into contact with the bottom

plate (See Fig. 1).

Inserting the battery will turn on the charger (the pilot

lamp lights up).

CAUTION

If the pilot lamp does not light up, pull out the

power cord from the receptacle and check the

battery mounting condition.

The pilot lamp goes off to indicate that the battery is

fully charged.

CAUTION

If the battery is heated due to direct sunlight, etc.,

just after operation, the charger pilot lamp may

not light. At that time cool the battery first, then

start charging.

⅜ Regarding recharging time

Table 1 shows the recharging time required according

to the type of battery.

NOTE: The recharging time may vary according to the

ambient temperature.

Table 1 Recharging time (approx. min.) at 20°C

Battery

voltage

(V)

Battery capacity (Ah)

1.5 Ah

3.6 V EBM315 60 min.

4. Disconnect battery charger from the receptacle or

cigarette lighter socket

5. Hold the charger firmly and pull out the battery

NOTE

Be sure to pull out the battery from the charger after

use, and then keep it.

Regarding electric discharge in case of new

batteries, etc.

As the internal chemical substance of new batteries and

batteries that have not been used for an extended period

is not activated, the electric discharge might be low when

using them the first and second time. This is a temporary

phenomenon, and normal time required for recharging

will be restored by recharging the batteries 2 – 3 times.

How to make the batteries perform longer.

(1) Recharge the batteries before they become completely

exhausted.

When you feel that the power of the tool becomes

weaker, stop using the tool and recharge its battery.

If you continue to use the tool and exhaust the electric

current, the battery may be damaged and its life will

become shorter.

(2) Avoid recharging at high temperatures.

A rechargeable battery will be hot immediately after

use. If such a battery is recharged immediately after

use, its internal chemical substance will deteriorate,

and the battery life will be shortened. Leave the battery

and recharge it after it has cooled for a while.

PREPARATION PRIOR TO OPERATION

CAUTION

⅜ No flammable gas, liquid or other flammable objects

at worksite.

⅜ Use outside or well–ventilated areas.

Do not inhale.

⅜ Keep the tool, fuel cell and battery away from sunshine

and from temperature exceeding 50°C (120°F).

01Eng_NT65GS_WE 12/3/08, 8:4512

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi NT65GB in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi NT65GB Manual

Product: