572250
32
Zoom out
Zoom in
Previous page
1/46
Next page
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Accessing Installation Menu
1. Press “MENU” button on the remote control and
select Installation by using ” or “ button.
2. Press “OK” button and the Installation screen will be
displayed.
Automatic Channel Scan (Retune)
1. In the Installation menu, select “Automatic Channel
Scan (Retune)” by using or button and press
OK button.
2. Options will be displayed. You can select options by
using ” or “ and OK buttons.
Menu Operations
Digital Aerial: Searches and stores aerial DVB stations.
Analogue: Searches and stores analogue stations
Digital Aerial & Analogue: Searches and stores aerial
DVB and analogue stations.
3. Whenever you select an automatic search type and
press OK button, a con rmation screen will appear on
the screen. To start installation process, select Yes, to
cancel select No by using or and “OK” button.
4. After auto channel scan type is set and selected and
con rmed, installation process will start and progress
bar will move along. If desired, press “MENU” button
to cancel process. In such a case, located channels
are not stored.
Manual Channel Scan
1. In the Installation menu, select “Manual Channel Scan”
by using or button and press OK button.
2. Manual Scan options screen will be displayed.
Select the desired “Search Type” using ” or “ button.
Manual search options will change accordingly.
3. Enter the multiplex (for digital manual s
earch) or
frequency number (for analogue manual search) using
the numeric buttons and press OK button to start search.
Analogue Fine Tune
1. Select “Analogue Fine Tune” from the Installation menu
by using or and OK buttons. Analogue ne tune
screen will be displayed.
NOTE: Analogue Fine Tune feature will not be
available if there are no analogue channels, digital
channels and external sources stored.
2. Press OK button to proceed. Use or button
to set Fine Tune. When nished, press OK button again.
First Time Installation
Deletes all stored channels and settings, resets TV to
factory settings and starts rst time installation.
1. Select First Time Installation option and press OK
button if you would like to reset the TV.
2. A warning screen will be displayed. Select YES
and press OK to continue. All prestored channels and
settings will be deleted in such a case.
3. The TV will reset after a short time and language
selection menu will be displayed.
You will be asked to enter the PIN number to start
process if the TV has been set up with Digiturk option.
Factory-default PIN number is 0000.
4. Follow the steps in the Initial set up section.
Clear Service List
(*) This setting is visible only when the Country option is set to
Denmark, Sweden, Norway or Finland.
1. Use this setting to clear channels stored. Press “ ” or “
” button to select Clear Service List and then press OK.
2. An OSD message will be displayed on the screen.
Press OK to cancel or select Yes to delete all of the
stored channels.
Insallation Controls
General TV Operation
31
01_[GB]_MB90_5112UK_DVBT_EXTENDED_IB_46940LED_BRONZE25_10080161_50228642.indd 31 03.09.2012 18:10:59
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi L46VG07U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi L46VG07U in the language / languages: English as an attachment in your email.

The manual is 3,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info