572228
19
Zoom out
Zoom in
Previous page
1/42
Next page
English - 18 -
There you can set/reset locking for the Main Menu, or
the Installation Menu to restrict access. If the menu
lock is disabled, there will be free access to the menu
system. Also in this menu you can change the lock
key and set/change parental lock mode.
Disabled: All menus are unlocked.
Main Menu: Main menu is accessible only with the
correct lock key. So the user cannot add, delete, re-
name, move channels, cannot set timers.
Installation: Installation menu is locked, so the user
cannot add channels.
Changes will be updated after exiting Configuration
Menu.
Timers
You can set a timer to switch the TV to any channel
without your intervention. This is also for making video
recordings of programmes when you are out.
Display the Main Menu by pressing the
button.
Highlight the Timers line by pressing
or button
and press the OK button to display the Timer menu.
Up to five separate timer events can be set and each
is displayed in the Timer screen, showing the event
number, the channel to be selected, the start time, end
time, date and the mode - whether that event is active
(and will be acted on) or not.
To set an event, highlight its mode button using the
or button and press the OK button to display the
timer entry window.
Here the five settings of channel name, start time,
end time, date and frequency mode can be set. You
can move freely between each setting using the
or buttons.
 The channel name is set using the
or button to
display the channel which broadcasts the programme.
The start time, end time and date are each set with
the digit buttons on the remote control in 24-hour for-
mat.
The frequency mode determines how often the
receiver operates this event and is set with the
or
button to be either Once, Daily, or Weekly.
If an invalid number for the start or end times or the
date is entered, Entered time is not valid message
appears on the menu.
If timer action occurs while the TV is watched, the TV
switches to the selected channel. When timer ex-
pires, the TV switches to the channel which it is
switched from.
Selected digital channel will be output via Scart-2.
You should connect your VCR to Scart-2 for record-
ing digital broadcast.
RECORDING FROM IDTV
Connect your VCR to AV-2 via a scart lead.
Set the AV-2 OUT in the feature menu to DDT, as
illustrated and described on page 27.
Set the time as described above.
Set your TV to standby using the remote control.Set
your VCR to correspond with the time set on your TV
and select external input (refer to your VCR instruc-
tion book).
NB. If you switch on your TV whilst the timer record-
ing is active and then switch back to standby, the
timer recording will be cancelled; the timer setting
will be deleted and the desired programme will not
be recorded.
Language
Some programmes are broadcast in two or more lan-
guages simultaneously. The language heard can be
selected from the Language Menu.
 Press the
button to display the Main Menu and use
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi L37VP01UC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi L37VP01UC in the language / languages: English as an attachment in your email.

The manual is 4,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info