572195
28
Zoom out
Zoom in
Previous page
1/55
Next page
English - 27 -
• When no module is inserted, “No Conditional
Access
module detected” message appears
on the screen.
• Refer to the module instruction manual for
details of the settings.
Note: Insert or remove the CI module only when the
TV is in STAND-BY mode or SWITCHED OFF.
TV Setup
You can use this item to display the TV
functions.
The digital TV Setup menu screen is accessed
from the main menu. Press the M button to
display the main menu and use “
” or “ ” button
to highlight “TV Setup”, press the OK button
to display TV Setup menu screen.
You can nd detailed information for all menu
items in “Analogue TV Menu System” section.
Setup
The adjustments in this menu are given as the
following:
Con guration
You can con gure the settings of your TV. Select
Con guration from Setup menu and press OK
to view this menu. Press the EXIT button on the
remote control to exit.
AC3 Audio (**for EU countries only)
In the Con guration Menu, highlight the AC3
Audio item by pressing “
” or “ ” buttons. Use
the “ ” or “ ” buttons to set the AC3 Audio as
On or Off.
If the channel that you are watching supports
AC3 Audio, turn this setting on.
Hard of Hearing (**for EU countries only)
Use “
” or “ ” button to select Hard of Hearing
and then press “ ” or “ ” button to set this
setting as On or Off.
If the broadcaster enables any special signal
concerning the audio, you can set this setting
as On to receive such signals.
Favourite Mode
Use this function to enable or disable favourite
mode. Press “ ” / “ ” button to set this function
as on or off.
Channel List
Use “
” or “ ” buttons to go to Channel List
option. Use “ ” or “ ” buttons to toggle Channel
List Mode. If you select “TV Only”, with the “
” or “ ” buttons, you navigate through only TV
channels. If you select “Radio Only”, with the “
or “ ” buttons, you navigate through only radio
channels. If you select “Text Only”, with the “
or “ ” buttons, you navigate through only text
channels. To save the recent changes and exit;
press the M button.
Active Antenna
Use
” or “ buttons to highlight Active
Antenna option.
When antenna power option is set as On
by pressing ” or “ button, +5V will be
transmitted to the antenna output.
This feature enables the use of active
antenna.
Note: Antenna power should be “Off” when standard
antenna is used instead of the active antenna.
Scan Encrypted
Scan Encrypted Channel feature will always be
ON after performing rst time installation.
When this setting is on, search process will
locate the encrypted channels as well. If it is
set as OFF manually, encrypted channels will
not be located while in automatic search or
manual search.
01_[GB]_MB35_UKIDTV_BRONZE3_32856W_1800UK_10066012_50158149.indd 2701_[GB]_MB35_UKIDTV_BRONZE3_32856W_1800UK_10066012_50158149.indd 27 21.10.2009 10:37:2521.10.2009 10:37:25
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi L32HP03UA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi L32HP03UA in the language / languages: English as an attachment in your email.

The manual is 4,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info