572248
11
Zoom out
Zoom in
Previous page
1/53
Next page
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
DON’T leave equipment switched on when it is
unattended unless it is speci cally stated that it is
designed for unattended operation or has a stand-by
mode. Switch off using the switch on the equipment
and make sure that your family know how to do this.
Special arrangements may need to be made for in rm
or handicapped people.
DON’T continue to operate the equipment if you are in
any doubt about it working normally, or if it is damaged
in any way - switch off, withdraw the mains plug and
consult your dealer.
ABOVE ALL
--- NEVER let anyone especially children push anything
into holes, slots or any other opening in the case - this
could result in a fatal electrical shock;
--- NEVER guess or take chances with electrical equipment
of any kind
--- it is better to be safe than sorry!
Power source
The TV should be operated only from a 220-240V
AC, 50 Hz outlet.
Warning: When the set is not in use for a long time,
disconnect from the power.
Positioning the TV
For ventilation, please leave a clear space of at
least 10cm all around the TV.
Do not block the ventilation openings.
Do not place the TV on sloping or unstable
surfaces, the TV may tip over.
To prevent damage to the TV, do not place any
objects on top of the TV.
Only use the TV in moderate climates.
Power cord and plug
Do not place the set, a piece of furniture, etc. on
the power cord (mains lead) or pinch the cord.
Handle the power cord by the plug. Do not unplug
the appliance by pulling from the power cord and
never touch the power cord with wet hands as
this could cause a short circuit or electric shock.
Never make a knot in the cord or tie it with other
cords. The power cords should be placed in such
a way that they are not likely to be stepped on. A
damaged power cord can cause re or give you
an electric shock. When it is damaged and needs
to be replaced, it should be done by quali ed
personnel.
This TV receiver is supplied with a moulded
mains plug. The mains plug must not be cut off,
as it may contain a special radio interference
lter, the removal of which could lead to impaired
performance. If you wish to extend the lead, obtain
an appropriate safety approved extension lead or
consult your dealer.
Observe the manufacturers instructions when
connecting extension leads to the set. Check the
fuse rating on the new plug; this should be tted
with a 5 Amp fuse which conforms to either ASTA
or BSI (BS1362) approvals, these are easily
identi able by either the
ASA
or symbols. If you
are in any doubt about the installation of an
extension lead, please consult a competent
electrician.
Safety Information
IMPORTANT - Please read these instructions fully before installing or operating
10 cm
10 cm
10 cm
4
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi L24DG07U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi L24DG07U in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 10,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info