572244
13
Zoom out
Zoom in
Previous page
1/47
Next page
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
After all the available stations are stored, Channel
List will be displayed on the screen. If LCN (*) is
available in your country, a message appears on
the screen which asks you if you want to sort the
channels according to LCN.
In some countries, the order of the channels is
arranged automatically by the broadcaster. This
is called logical channel number (LCN). If the
selected country has LCN support, the channels
will be enumerated one by one, beginning from
number 1. You cannot move any programme to a
position after the last saved one. If you try to do
this, both programmes will change their places. If
LCN support is not available, you can move the
channels as you wish.
Press OK button to quit channel list and watch TV.
(*) LCN is the Logical Channel Number system that
organizes available broadcasts in accordance with a
recognizable channel sequence.
General operation
Press the SOURCE button on the remote control
for switching between the sources.
Information Banner
Whenever you change channel using the P-/P+
buttons or the numeric buttons, the TV displays
the broadcast picture along with an information
banner at the bottom of the screen.
The information banner can be displayed at any
time while watching TV by pressing the INFO
button on the remote control ( g.8).
Hint: Not all channels broadcast the programme data. If
the name and time of the programme are not available,
then information banner will be displayed with blanks.
If the selected channel is locked, you must enter the
correct four-digit numeric code to view the channel
(default code is 0000). “Enter PIN” will be displayed on
the screen in such a case.
Getting Started
Initial set up
When turned on for the rst time, the “language
selection” menu appears. The message “Welcome
please select your language!” is displayed in all
language options listed alphabetically as shown
below.
Press the “ ” or “ ” button to highlight the
required language, press OK button to select.
“First Time Installation” appears. Use“ ” or “
button to set the required country, and press “
” button to select “Teletext Language”. Use “
or “ ” button to set the “Teletext Language” and
select “Scan Encrypted” using “ ” or “ ” button.
Set “Scan Encrypted” using “ ” or “ ” button
as shown below.
Press OK button on the remote control to continue
and the following message will be displayed on the
screen as shown below.
To start “Automatic channel scan” select Yes
(to cancel select No), highlight the item required
using the “
” or “ ” button and press OK button
to select.
The IDTV will automatically tune to the UHF
or VHF transmission channels, searching for
digital terrestrial and analogue (if available) TV
broadcasts.
IMPORTANT: Do not turn off the TV while
“First Time Installation” is in operation.
12
01_MB60_ypbpr_[GB]_(TV)_IDTV (ARGOS)_BRONZE17_1825UK_22915LED_10074404_50196881.indd 12 12.09.2011 17:29:54
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi L22VG07U B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi L22VG07U B in the language / languages: English as an attachment in your email.

The manual is 6,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info