370389
24
Zoom out
Zoom in
Previous page
1/49
Next page
Ä23
DVD PLAYBACK
Preparations
Press on the standby button of your audio
system if the player has been connected to an
audio system.
BASIC PLAY:
1. Press on the standby button
2. Press OPEN/CLOSE to open the disc tray.
3. Place a disc onto the tray
Hold the disc without touching either of its
surfaces, position it with the printed title side
facing up, align it with the guides, and place it in
its proper position.
4. Press OPEN/CLOSE
The disc tray is automatically closed and play
commences.
A menu may appear on the TV screen after a few
moments or the film may start immediately after
the introduction of the Film Company. This
behaviour depends on the disc content and may
change.
Note:
Step 5 is available only when a menu is shown
after the disc is inserted.
Press
3465 or the number button(s) to
select the preferred menu item.
5. Press SELECT
Play of the selected items now commences. The
played item may be a film, a still picture or another
submenu depending on the disc.
Note:
When using menus the disc controls the
behaviour of the player.
Stopping play and returning to the menu screen
(when a menu is available on the disc)
Press MENU or TITLE button depending on the
disc. Play is suspended, and the Disc menu
screen is displayed.
After operation
When the unit is not in use, remove the disc and
press STANDBY to turn the unit to the standby
mode.
Note:
The disc continues to rotate while the menu is
displayed even after the player has finished
playing a particular item. When no further
selections are to be played, be sure to press the
STOP button to clear the menu display.
If the disc is placed in upside down (and it is a
single sided disc), the VFD display on the player
will indicate NO DISC.
For your reference:
When
´
appears while a button is being
operated, it means that the disc prohibits the
corresponding operation.
STOPPING PLAY
Press stop twice.
For your convenience:
When play is stopped the unit records the point
where STOP was pressed once (RESUME
function). Press ENTER again, and play will
resume from this point. When the tray is opened
or the STOP is pressed again, the RESUME
function will be cleared.
To stop the play permanently, press STOP twice.
When the STOP button is pressed for the first time,
a message PRESS PLAY TO CONTINUE will
appear on the screen to remind you if you want to
continue the play. To stop the play, press the STOP
button again or you can press ENTER to continue.
RAPID ADVANCE (RAPID REVERSE)
Press SEARCH/SLOW (7 Fast reverse or 8
Fast forward) on the remote control or Search
7 or 8 on the main unit during play.
Normal play is resumed when the SELECT or
PLAY/PAUSE button is pressed.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi htdk 170 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi htdk 170 in the language / languages: English as an attachment in your email.

The manual is 2,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info