370389
21
Zoom out
Zoom in
Previous page
1/49
Next page
Ä20
SELECTING THE MODE
You can select the DVD player, Radio, AV or
SCART using the Mode button.
Radio
To get the best performance be sure that AM and
FM antenna is connected to the AV receiver. AUDIO
VFD grid will be highlighted in radio mode.
Adjusting the frequency :
Press on the left arrow for AM and Right Arrow for
FM. Band name text and MHz, kHz grids will be
displayed on the VFD.
Press Search Forward or Search Backward to
increase or decrease the frequency till you reach
the desired channel. VFD will display the
frequency.
You can press Search Forward or Backward
continuously to increase or decrease the
frequency automatically. You can also use Up and
Down buttons for the same operation. Operation
will be stopped when it is tuned to a channel.(Auto
Tune Function) VFD will display the frequency.
Use any button to cancel auto tune operation.
Volume button functions are disabled in auto tune
mode.
Storing the channel in the Memory :
After adjusting the desired channel you can store
it in the memory . In order to do that ;
Press on the Select button to enter Memory Set
mode. Program grid is displayed on the VFD. You
can use Return button to cancel Memory Set
mode.
Press the number button that you want to store
this channel. Use 10+ button to enter two digits.
VFD will display the preset channel number and
its frequency.
You can keep 10 AM channels and 30 FM
channels in the memory.
Selecting the preset channels:
Press on the left arrow for AM and Right Arrow for
FM.
Press the number button of the desired preset
channel. VFD will display the preset channel
number and its frequency. Use 10+ button to enter
two digits.
Press the Skip Next or Skip Previous button to
increase or decrease the preset channel number.
VFD will display the preset channel number and
its frequency
Selecting Stereo Mode:
Press on Audio button to enable or disable
stereo property.
AV MODE
You can use AV connection only in Normal
operation. You can switch to your connected Video
Source using mode button. In this connection you
can use your Av receiver as an Amplifier. Standby,
Mute, Speaker Volume and Mode buttons can be
used in this mode .
SCART MODE
You can use Scart connection in Standby and
Normal operation.
IN STANDBY MODE
If there is a Video and Audio signal in AV Input of
receiver, this signal will be given as a SCART
output automatically. Standby, Open/Close, and
Play buttons can be used in this mode.
IN NORMAL MODE
You can switch to your connected Video Source
using mode button. In this connection you can use
your Av receiver as an Amplifier. Standby, Mute,
Speaker Volume and Mode buttons can be used
in this mode .
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi htdk 170 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi htdk 170 in the language / languages: English as an attachment in your email.

The manual is 2,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info