370702
25
Zoom out
Zoom in
Previous page
1/57
Next page
25
Speakers Setup
To specify the balance and level of the speakers
You can use the Test Tone function to check whether all the
speakers are connected correctly, and to specify the balance
of the speakers.
1 Press the TEST TONE button on the remote control.
You will hear the test tone from Front-left speaker, Center
speaker, Front-right speaker, Surround-right speaker and
Surround-left speaker in sequence.
2 Sit at your listening position, use the VOLUME and VOL-
UME
buttons to adjust the level of each speaker..
Adjust the volume level so that the volume of the test tone
from each speaker sounds the same.
The adjusted value will appear on the front panel display
and TV screen. If you do not operate the remote for a few
seconds, the value turns off and is stored in the system.
3 Press TEST TONE again to turn off the test tone.
Note
The playback will pause during test tone.
The test tone only tests the valid speakers, depending on the
current listening mode.
You can vary the level of each speaker as follows. At the same
time, you can adjust the Treble of the front speakers.
1 Press the SELECT button to select a channel. The level of
the channel will appear on the front panel display and TV
screen.
TRE (Treble level) adjustable range: -10 dB to +10 dB, 2
dB/step.
FL (Front-left level), CNT (Center level), FR (Front-right
level), SR (Surround-right level), SL (Surround-left level)
and SUB (Subwoofer level) adjustable range: -15 dB to
+10 dB, 1 dB/step.
2 Use the VOLUME and VOLUME buttons to adjust the
selected channels level.
3 If you do not press the SELECT or VOLUME / buttons
for a few seconds, the values turns off and is stored in the
system.
Note
The optional items vary with the changing of listening mode.
To adjust the volume of all the speakers (Master Volume) at
one time
Use the VOLUME
and VOLUME buttons in normal mode.
To shut off all of speakers output
Press the MUTE button. The red LED on the front panel starts
to blink.
Press it a second time to release muting and resume the
normal output. The blinking LED blacks out.
VOLUME /
SELECT
VOLUME
SELECT
MUTE
TEST TONE
STANDBY
SUB
TITLE
DVD TUNER AUX
LANGUAGE TITLE RETURN
ANGLEGOTO
MENU
/PBC
ZOOM
SETUP
AUDIO1
DISPLAY
2 3
4 5 6
7 8 9
>10 0
N/P
SLEEP MUTE
OPEN/
CLOSE
ENTER
N
A-B REPEAT PROG. SELECT
LISTENING
TEST
TONE
ADJ/VOL
STOP PLAY/PAUSE
STEP
SLOW
+
STA- STA + ST/MO
T U TUN + MEMO
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi htd k 150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi htd k 150 in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info