370702
22
Zoom out
Zoom in
Previous page
1/57
Next page
22
Selecting the Colour System
You can setup the colour system of this unit to match up your
connected TV set. If the colour system of this unit is different
from that of the TV set, the images can not be displayed nor-
mally on the screen. The default setting is MULTI.
1 Press SETUP button to enter SETUP MENU. Use / to
select GENERAL SETUP (see page 20), and then press
ENTER button.
2 Highlight TV TYPE using / , then press button to go to
the right option list. Select MULTI, NTSC or PAL using / ,
then press ENTER to confirm your selection.
3 Press SETUP again to exit menu.
Note:
You can change the colour system of the unit temporarily
using NTSC/PAL button on the remote control.
MULTI
NTSC
PAL
Selecting the Audio Output
Mode
You must setup the audio output mode correctly, if not, you will
not get the audio outputs. The default setting is ANALOG.
ANALOG: If the SPEAKERS outputs on the rear panel are
connected with speakers directly, or the AUDIO OUT (2 RCA
jacks) is connected to amplifier, select this item.
SPDIF/RAW: If the COAXIAL or OPTICAL output on the rear
panel is connected to a receiver with built-in Dolby Digital,
DTS or/and MPEG decoder, select this item.
SPDIF/PCM: If the COAXIAL or OPTICAL output is connected
with a receiver which accepts PCM audio signal, select this
item.
1 Press SETUP button to enter SETUP MENU. Use / to
select GENERAL SETUP (see page 13), and then press
ENTER button.
2 Highlight AUDIO OUT using / , then press button to go
to the right option list. Select ANALOG, SPDIF/RAW or
SPDIF/PCM using / , then press ENTER to confirm your
selection.
3 Press SETUP again to exit menu.
Note:
If the SPDIF/RAW is selected and the audio source is LPCM
(DVD), the outputs in the COAXIAL and OPTICAL are PCM.
If the SPDIF/RAW is selected and the audio source is audio
CD, the outputs in the COAXIAL and OPTICAL are PCM.
If the ANALOG is selected, the COAXIAL and OPTICAL will
not have audio outputs.
If your speaker system does not match your AUDIO OUT
setting, you will not be able to enjoy the true original sound.
ANALOG
SPDIF/RAW
SPDIF/PCM
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi htd k 150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi htd k 150 in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info