505962
18
Zoom out
Zoom in
Previous page
1/27
Next page
English - 17 -
Auto Power Down
This box will automatically switched from active mode
into standby mode, after less than three hours in
active mode, following the last user interaction and/or
a channel change with an alert message two minutes
before going in to standby mode. The Automatic
power-down will be set as default and the user will
be able to change Automatic power down to on or
off in the menu
Receiver Upgrade
Over Air Download (OAD): To ensure that your STB
always has the most up todate information. Please
ensure that after use it is set to its standby mode.
The STB automatically powers up at 3.00 A.M. each
day and searches for any new information which may
be broadcast and will download this to your receiver
automatically. This operation will normally take
approximately 30 minutes. If you have an important
recording to make at 3.00 A.M. which must not have
a 30 minutes interrupt then you can disable the auto
OAD search by performing the following:
• Press Menu button and using the “
”/“ buttons to
choose Setup and press the OK button.
• Highlight Conguration menu with “
”/“ keys and
pres OK.
• Use “
”/“ buttons to choose “RECEIVER
UPGRADE” and press OK button.
• Using the left / right button change “Automatic
scanning” from Enabled to Disabled.
• Highlight “Scan for upgrade” menu with “
”/“ keys
and press OK to commence upgrade.
Do not forget to re enable the automatic OAD function
after you have made your recording by repeating the
above instructions but this time selecting ENABLE.
Parental Locking
Use “ ”/“ buttons to go to Parental Lock option.
Press OK button to enter the menu. A box asking for
the lock key is displayed. The key is set to “0000”
initially. Enter lock key. If it is incorrect, “Wrong Pin”
is displayed. If it is correct, the Parental Control Menu
is displayed.
Menu Lock
In menu lock you can set locking for All Menus, or the
Installation Menu to restrict access to these menu’s. If the
menu lock is disabled, there will be free access to the menu
system. Use “
”/“ buttons to go to Menu Lock option.
Use “
”/“ buttons to choose Menu Lock Mode.
DISABLED : All menus are unlocked.
ALL MENUS : All Menus are accessible only with the
correct lock key.So the user can’t add, delete, rename,
channels, can’t set timers.
INSTALLATION MENU : Installation menu is locked.So
the user can’t add channels. Changes will be updated after
exiting µ&RQ¿JXUDWLRQ0HQX¶.
Set Pin
The PIN code of the unit changed. Use “ ”/“ buttons to
go to “Set PIN” option. Press OK to display the “Set PIN”
window. Use NUMERIC buttons to enter new pin number
you will need to input your new pin a second time for
verication purposes. If Both pin numbers are four digits
long and the same, the pin will be changed. The factory
default pin number is 0000, if you change the pin number
make sure you write it down and keep it safe.
Language
In this menu the user can adjust the preferred language.
Language is changed by pressing OK key.
Menu: shows the language of the system
Preferred
These settings will be used if available. Otherwise the
current settings will be used.
Audio: by pressing “
”/“ keys change the audio
language.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi HDR325 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi HDR325 in the language / languages: English as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info